Справочник Пользователя для Majestic Appliances UVS36RN

Скачать
Страница из 24
20
UVS33/36 Vent-Free Heaters
20002211
Decorative Frame Trims
A selection of decorative frame trim kits are available for 
mounting around the outside of the appliance to en-
hance its visual effect on the room. Installation instruc-
tions for each decorative frame trim are included with 
the frame trim kit. 
 
Unit 
Kit Model
 
UVS33 
DV33GTP, DV33GTA, DV33GTS,
 
 
DV33TKP, DV33TKMP,
 
 
DV33TKMA, DV33TKMS,
 
 
DV33TKMB, DV33TKWP,
 
 
DV33CBTK
 
UVS36 
DV36GTP, DV36GTA, DV36TKP,
 
 
DV36TKA, DV36KMP, DV36KMA
 
 
DV36KWP, DV36KWA
Glass/Catalyst Kit
Only glass approved by CFM Corporation should be 
used on this fireplace.
• 
The use of any non-approved replacement glass will 
void all product warranties.
• 
Care must be taken to avoid breakage of the glass.
• 
Do not operate appliance with glass front re-
moved, cracked or broken.
•   
Replacement glass (complete with gasket) is 
available through your CFM Corporation dealer 
and should only be installed by a licensed quali-
fied service person.
UVS 36GCFK
1.  Turn unit "OFF".
2.  Remove the top louvre. Refer to Page 11, Figure 15.
3.  Remove the window frame. Refer to Page 11, Figure 
16.
4.   Remove the deflector firebox by removing the three 
(3) screws securing it to the firebox top. (Fig. 22)
5.   Install a catalyst up through one of the rectangular 
holes in the firebox top. (Fig. 23)
6.   While holding the catalyst in place, slide the cata-
lyst bracket over the studs and secure with the nuts 
provided. (Fig. 23)
7.  Repeat Steps 5 and 6 for second catalyst.
8.  Install the deflector firebox with screws removed 
earlier.
9.  Install the glass door as provided in kit.
10. Install the top louvre.
Installation complete.
������
����������������
����
Deflector Firebox
FP1477
Fig. 22  Remove deflector firebox.
������
������������������
����
Catalyst
Catalyst Bracket
Nuts
FP1478
Fig. 23  Install catalyst and bracket in place, secure with nuts 
provided.