Справочник Пользователя для Phantom Tech SU0508L

Cutting the Top and Bottom 

Rail 

and Catch Frame

Cutting the Top Rail of the Sure View 
Screen is an easy process.

1.  Using the “Length to be cut” dimension           
 

calculated on Page 7, carefully measure the Top  

 

Rail on the end opposite the end cap. Mark on  

 

all sides to ensure an even cut. 

2.   Wearing safety glasses, cut straight through the  
 

Top Rail using either a chop saw or a    

 

hacksaw with a bi-metal blade. (A)

Choosing and Cutting the Bottom Rail

Before cutting, it is important to select the    
correct Bottom Rail for installation. The Sure View 
Screen package comes with two Bottom Rails to                
accommodate both flat and angled door sills. Please 
refer to (B) to determine the correct Bottom Rail.

1.   Using the same “Length to be cut” dimension  
 

used for the Top Rail, measure and mark the  

 

appropriate Bottom Rail on all sides to ensure an  

 

even cut. The Bottom Rail can be cut on   

 

either side.

2.   Cut straight through the Bottom Rail. (C)

Cutting the Catch Frame

Either end of the Catch Frame can be cut.

1.   Using the Screen Housing and Catch Frame  
 

“Length to be Cut” dimension calculated on 

 

Page 7, carefully measure and mark the Catch  

 

Frame on all sides to ensure an even cut.

2.   Cut straight through the Catch Frame. (D)

NOTE: It is important to wear safety glasses at all 
times when cutting components of the Sure View 
Screen. After cutting any part of the Sure View 
Screen use a file to remove any burrs from the cut 
surfaces.

8

Catch Frame

Length

to be cut

Choose the correct Bottom Rail for either

flat or angled door sills.