Справочник Пользователя для NuTone PFOB-52

1. Refer to Figure 5. Using three screws and washers 

fasten top and bottom blade bracket to blade as shown.

2. Refer To Figure 6. Using two motor screws and washers

provided, secure blade to fan flywheel  Repeat for
remaining blades.

1. Reconnect electrical supply at breaker or fuse box.
2. Check for proper operation of three speed pull chain switch

HI – MED – LOW – OFF.

3. Let fan come to a complete stop, then check operation of

reversing switch.

4. For fan balancing see instructions provided with the

balancing kit.

To use the optional extension stem (not supplied) follow

these steps:
1. Loosen anti-turn screw and slide hanger ball from 

standard stem.

2. Remove ground wire and pin.
3. Attach ground wire and pin to extension stem.
4. Slide hanger ball onto stem and completely tighten 

anti-turn screw.

5. Mount extension stem to fan as described in “Mounting

Fan”.

1. Be sure fan is switched off before cleaning it.*
2. Keep hands, clothing and other objects away from moving

fan blades.

3. Exercise close supervision of children if they are present

when fan is in operation.

4. Shut off electricity to fan at main fuse or circuit breaker box

before servicing or working near fan.

5. Do not operate fan if it has been damaged in any manner.

Contact your nearest NuTone Authorized Service Center.

*Fan blades may be cleaned with a mild soap solution. Do not use
an abrasive cleaner or a strong chemical cleaner.