Справочник Пользователя для Soleus Air FS1-40R-41

 
 
Using Fan Controls 
 

1)  Set the fan on a stable, level surface. 

2)  Turn the fan on by pressing the Power/Speed button located below the Multi-Color 

display, or the On/Speed button on the Remote Control. 

3)  Adjust the speed setting by pressing the Power/Speed.  To adjust the speed 

setting using the remote, press the On/Speed button. 

4)  Pressing the Mode button on either the fan or the remote will choose the desired 

wind mode: Standard, Natural, Work/Sleep.  In standard mode the fan operates at 
a steady speed.  Natural mode simulates the wind by alternating the speed of the 
fan.  In Work/Sleep mode the fan decreases speed in the middle of the oscillation 
pattern. 

5)  To oscillate the fan head, press the Swing button located on the fan or the remote. 

6)  This fan includes a 7.5 hour timer.  To operate the timer, press the Timer button 

(located on the fan & remote) until the desired time is visible on the Multi-Colored 
Display.  Each button press will increase the time by 10 minute increments. 

7)  To turn the fan off, press the Power/Speed button on the fan, or the Off button on 

the remote control. 

 

 

•  To adjust the height of the fan, turn the Adjustable Height Knob (L) counter-

clockwise to loosen the stand. Adjust the fan to the desired height, then firmly 
tighten to secure into place.  

•  To adjust the tilt on the Fan Head, loosen the knob below the Motor Housing and 

tilt the fan forward/back by pulling or pushing the top of the Fan Grill.  The fan will 
make a clicking noise while being adjusted.  Once the Fan Head is set to the 
desired tilt, tighten the knob to secure into place. 

 

 

 

 

 

 

7