Справочник Пользователя для Rinnai V3237FFU

Скачать
Страница из 52
6
Rinnai Corporation
V3237 Models
O W N E R ’ S   I N S T A L L A T I O N   I N F O R M A T I O N
All Rinnai water heater(s) SHOULD be installed by a state qualified or 
licensed contractor. Failure to comply with state and local codes 
pertaining to water heater installation may void the warranty on your 
new water heater(s). It is the responsibility of the person having the 
water heater installed to ensure the installer has proper licences and 
permits for installing water heater(s) in your location. In addition to 
licensing and permits, Rinnai encourages all installing contractors to 
attend a product knowledge class before installing any of our water 
heaters to help insure maximum customer satisfaction and maximum 
warranty coverage. 
This appliance must be installed in accordance with local codes, or in the 
absence of local codes, the National Fuel Gas Code, ANSI Z223.1/NFPA 54  
and/or the CSA B149.1, Natural Gas and Propane Installation Code.
FOR  INDOOR  UNITS:  These models have the “FFU” designation
ONLY Install this product indoors, DO NOT install outdoors. 
FOR  OUTDOOR  UNITS:  These models have the “W” designation
ONLY Install this product outdoors, DO NOT install indoors. 
Do Not use this appliance if any part has been underwater. 
Immediately call a qualified service technician to inspect the appliance 
and to replace any part of the control system and any gas control 
which has been underwater. 
Detailed instructions on the proper installation practices to follow for 
the installation of your new hot water heater are included at the back 
of this manual.
 
These models have been built in accordance with
the requirements of the ASME Boiler and Pressure 
Vessel Code and have received the Certificate of 
Authorization from the National Board.  The heat 
exchangers on these units have the NB and the 
HLW stamps.
REU-V3237FFU-ASME
REU-V3237FFUC-ASME
REU-V3237W-ASME
REU-V3237WC-ASME