Справочник Пользователя для Heath Zenith 598-1313-00

-3-

8.  Determine mounting location. 

Note: The back of the chime 

base is recessed to allow the base to cover the wire hole in the 
wall when mounting the base to the wall.

9.  Mount chime base to wall using screws and anchors provided (see 

Figure 2). (Drill 7/32" diameter pilot hole for wall anchors.)
•  Mount keyhole screw to wall leaving about 1/8" (3 mm) of 

the  screw  threads  exposed. 

Note:  Keyhole  slot  is  located 

about 3/4" (19 mm) from top of chime.

•  Route wires through wire entrance hole in new chime base.
•  Using keyhole on back of chime base, hang base on screw.
•  Level chime base.
•  Using the slots located in the bottom of the wire entrance 

hole, insert second screw through whichever slot is horizontal 
and attach to wall and tighten.

Existing Chime 
Wires from Wall

Wire 
Entrance 
Hole

Cover Pin 
Installed 
Correctly

Keyhole Slot

Back of 
Chime Base

Keyhole 
Screw

Wire Entrance Hole

Mounting Screw

Front of Chime 
Base

Mounting 
Screw Slots