Справочник Пользователя для Shark S3501BB
TOLL FREE:
1-800-798-7398
FILL
4
Lay the mop on the floor or on
a counter top and remove the
water tank cap by turning counter
clockwise. Fill the water tank using
the filling flask. Do not overfill the
water tank. Replace the water cap
and tighten.
water tank cap by turning counter
clockwise. Fill the water tank using
the filling flask. Do not overfill the
water tank. Replace the water cap
and tighten.
IMPORTANT:
Make sure your floors
are sealed. Before using the
Steam
Pocket
®
Mop consult page 4 for
more information.
Quick Start
2
4
When assembling your
Steam Pocket
®
Mop there may be a little water in or
around the water tank. This is because
we test all our
around the water tank. This is because
we test all our
Steam Pocket
®
Mops
100% before you buy them, so you get
a quality
a quality
Shark
®
Steam Pocket
®
Mop.
3
1
ASSEMBLE
1
Insert the mop handle into the
pump actuator (the tube that leads
to the tank). Push the mop handle
and pump actuator together in
until you hear it click into place.
to the tank). Push the mop handle
and pump actuator together in
until you hear it click into place.
2
Select a cleaning pad. Fit one side
of the pocket onto the head first,
then using the lavender loop, pull
the pocket over the head. Attach
the quick fasteners on the top of
the pocket to secure in place.
then using the lavender loop, pull
the pocket over the head. Attach
the quick fasteners on the top of
the pocket to secure in place.
3
Snap the mop head into the base to
secure it. Press the release button
to exchange mop heads.
to exchange mop heads.
S3501_N_S3501BB_11_IB_ENG_101119.indd 4
10-11-22 2:28 PM