Справочник Пользователя для Shark KD450W

Скачать
Страница из 20
4
TOLL FREE: 1-800-798-7398
Cleaning Your Carpets
The Sonic Duo
 comes with a Reusable Bottle 
with a “Purple” cap. This is to be used with the Low 
Moisture -No Rinse- Carpet Shampoo. The Sonic 
Duo
 also comes with a second faster setting that 
is to be used when cleaning carpets.
Step 1:
1
   Vacuum your carpets and/or area rugs to 
remove any loose dirt or dust that may have 
accumulated in the carpet. 
2
   Use  the  Activating Pretreater Carpet Stain & 
Odor Remover to pretreat any spots and stains 
that stand out. Spray the spots until saturated 
and let sit for 5-10 minutes.
Step 2:
3
   Attach the Carpet/Rug Cleaning Pad to the 
bottom of the Sonic Duo
. This pad has a 
“Purple” trim and a “Purple” tag that says 
“Carpet/Rug Cleaning Pad” on it. Attach the 
side of the Carpet/Rug Cleaning Pad with the tag 
to the back of the Sonic Duo
. (Fig. 6)
4
   To remove the Reusable Bottle, hold it and pull it 
up to remove it from the unit. (Fig. 7) Remove 
the cap.
5
   Take the Reusable bottle with the “Purple” cap 
and fill it first with water until the “Water Fill 
Line” and then with the Low Moisture -No Rinse 
- Carpet Shampoo until the “Solution Fill Line”. 
(Fig. 8)  
Always fill with cold water first and then the 
add the cleaning solution to avoid foaming 
and to ensure accuracy
fig. 9
fig. 6
fig. 8
fig. 7
 IMPORTANT: Always check with the carpet 
manufacturer or distributer before using the 
Shark
®
 Activating Pretreater Stain & Odor 
Remover or the Low Moisture -No Rinse - Carpet 
Shampoo. To determine the colorfastness of any 
carpet -especially with reds or blues - take a 
clean, moist towel and gently rub a small area in 
an inconspicuous area. If color comes off on the 
towel, you should discontinue use. 
Using Your Sonic Duo
™ 
Carpet, Wood & Hard Floor Cleaner
 
 NOTE: For heavy traffic areas we recommend 
that you dilute the solution 3 parts water to 
1 part solution. For weekly maintenance we 
recommend that you dilute the solution 7 parts 
water to 1 part solution. 
6
   Screw the bottle cap on tightly and insert the 
Reusable Bottle into the unit upside down. Push 
it down to make sure that it is well inserted. You 
will hear an audible “Click” when the Reusable 
Bottle is inserted properly. (Fig. 9)
7
  Twist the quick release cord holder to unwrap 
the power cord completely. (Fig. 10)
  Plug into an electrical outlet and slide the “On/
Off” button turn the Sonic Duo
 on. Select 
the faster “II High” setting. (Fig. 11)
fig. 10
fig. 11
KD450W_26_IB_E_130511_1.indd   4
13-03-11   3:43 PM