Справочник Пользователя для Hunter Fan 30772

Скачать
Страница из 9
©2011 Hunter Fan Co.
3
USING YOUR AIR PURIFIER
1. This Air Purifier is designed for use on 
a flat, level surface and may not work 
properly on an uneven surface. ALWAYS 
place this Air Purifier on a firm, level 
surface. ALWAYS place the Air Purifier at 
least six (6) inches away from walls and 
three (3) Ft. from heat sources such as 
stoves, radiators, or heaters.
2. Place the Air Purifier in an area that is out 
of the reach of children.
3. Before using the Air Purifier, extend the 
cord and inspect for any signs of damage. 
DO NOT use the product if the cord has 
been damaged.
4. To reduce the risk of electric shock, this 
product has a polarized plug (one blade is 
wider than the other) as a safety feature. 
This plug will fit into a polarized outlet only 
one way. If the plug does not fit fully into 
the outlet, reverse the plug. If it still does 
not fit, contact a qualified electrician. DO 
NOT attempt to defeat or override this 
safety feature.
5. ALWAYS UNPLUG the Air Purifier when it 
is not in operation, while the filter is being 
changed, and while it is being cleaned.
6. DO NOT tilt or move the Air Purifier while it 
is in operation. Shut off and unplug before 
moving.
7. DO NOT immerse the Air Purifier in water 
as permanent damage will occur. Refer to 
and follow the CLEANING AND FILTER 
REPLACEMENT instructions.
8. DO NOT run the ionizer if tobacco smoke, 
air fresheners, dripless wax candles, or 
grease from cooking is present. 
 Save These Important Instructions
SAFETY INSTRUCTIONS
1. Take the air purifier out of the box and 
remove the clear plastic protective bag and 
place the unit on a firm level surface.
2. Before turning on the air purifier, you 
need to confirm that the filters are firmly in 
place and have not become loose during 
shipping. To check the filters, open the front 
grill by grabbing the handle with the Hunter 
Logo and gently pull forward, then lift the 
door from the unit.
3. The carbon pre-filter is mounted inside the 
front of the unit with hook tape. Confirm 
that it properly covers the grill vents. You 
may notice a few black particles coming off 
the pre-filter. Those particles are part of the 
odor-removing activated carbon and will be 
collected on the filter during use. 
4. The HEPAtech
®
 filter will be resting inside 
the unit. If present, remove the plastic bag 
surrounding the filter and place the filter 
back into the Air Purifier. The  filter should 
have arrows on the side to indicate air flow 
and the direction the filter should be placed 
back into the unit.
Figure 1.