Справочник Пользователя для Vornado AC500

16   English

Filter Replacement

7. To reset the Replace Filter notification - press and hold the 

REPLACE CARBON or REPLACE HEPA button, depending 
on which Filter was replaced, for at least 3 seconds. The 
light will turn off confirming the indicator is reset.

Note: Do not operate the Air Purifier without Vornado Carbon 
and Vornado HEPA Filters in place. 

µ

µ

Press for

3 seconds.

Press for

3 seconds.

Safety Shut-Off Feature
For your protection, the unit is designed to operate only if the 
Front Panel is in place. Do not attempt to override this safety 
feature. If, after the Front Panel has been reinstalled, the unit 
does not operate, remove and reinstall the Front Panel to as-
sure proper placement.

6. Replace Front Panel by positioning the Panel slightly above 

the unit and aligning the tabs of the Front Panel with the 
holes in the unit (A).   Gently press the Front Panel down, 
sliding into the tab slots and allowing the magnets to se-
curely lock the Front Panel in place.  

Follow the steps listed below when you are ready to store your 
unit.
1. Unplug power cord and bundle loosely.
2. Lift unit with both hands, using hand holds. (Refer to USER 

TIPS on page 13)

3. Cover, or place back in retail carton if available.  This will 

prevent the unit from accumulating dust overtime.

4. Store unit in a cool and dry location.

Storage