Справочник Пользователя для Vermont Casting DBR36

- 28 -

1. Slide the top edge of the frame window screen
    through the slots beneath the main frame window
    top trim support.
2. Make the frame window screen parallel to the main
    frame window.
3. Slide the bottom edge of the frame window screen
    into the space that exist between the glass and the
    main frame window bottom trim support.

1. Lift the frame window screen moving it parallel to the
     glass.
2. Move the bottom side of the frame window screen
    away from the glass.
3. Slide the frame window screen down from the top trim
    support.

TOP TRIM 
SUPPORT

BOTTOM TRIM SUPPORT

MAIN 

FRAME

Fig. 57

1.

Remove glass and  logs.

2.

Place refractory side supports so that the hole fits over
the screw head on the firebox floor.

3.

Place refractory base sides on the floor of the firebox.

4.

Place back refractory - small brick edge down into
support (See Fig. 59).

5.

Attach adjustable tabs, packed with refractory, onto
the studs found on the top of the firebox using the 2-10/
24 nuts provided.

6.

Slide side panels into side supports and behind side
tab and adjust, fitting the ceramic tight to the side of the
firebox.  Tighten nuts. Fig. 58.

Fig. 58

Fig. 59

7.

Place refractory base centre in front of the burner.