Справочник Пользователя для Vermont Casting DV360
25
DV360/580 Series Direct Vent Gas Fireplace
20010667
DV360
H100a
hearth Panels
1/27/00 djt
Screw
Burner
Hearth Panels
Grate
Front of Unit
H100a
Screw
Fig. 48 Hearth panel location.
Installation of Logs
Remove front glass. (Refer to “Window Frame As-
sembly Removal” Section, Fig. 47) Remove logs from
packaging.
sembly Removal” Section, Fig. 47) Remove logs from
packaging.
As with all plastics — these are not toys
and should be kept away from children
and infants.
and should be kept away from children
and infants.
Log Identification Chart
Logs
DV360
DV580
Log Front Left
20010673
E9
Log Front Right
20010672
E10
Log Rear
20010675
E8
Log Top Left
--
E12
Log Top Right
20010676
E13
Log Front Center
--
E11
Log Top Center
20010677
--
Log Overlay
20010674
--
NOTE: Refer to Figure 49 for bracket and bend loca-
tions.
1. Place the log front right. Hold the log with the pointed
end toward the left. Place on top of burner toward
the right. Slide the log toward the front until it comes
in contact with the bracket at the front of the burner
housing behind the burner tube. (Fig. 49) Adjust the
log until the pointed end on the left is aligned with
the left edge of the bracket. (Fig. 50) NOTE: Gently
push down on the right rear of the log so the pilot
front shield cuts slightly into the log. This will help to
ensure proper log position.
the right. Slide the log toward the front until it comes
in contact with the bracket at the front of the burner
housing behind the burner tube. (Fig. 49) Adjust the
log until the pointed end on the left is aligned with
the left edge of the bracket. (Fig. 50) NOTE: Gently
push down on the right rear of the log so the pilot
front shield cuts slightly into the log. This will help to
ensure proper log position.
������
���������������������
����
���������������������
����
Log Front Right
LG477
Figure 50
Front Brackets
������
������������
����
������������
����
Stop
Bracket
Rear Log
Bracket
Pilot
Bracket
Bend
Front Left
Bend
Front
Brackets
FP1653
Fig. 49 Burner brackets and bends.
Left Edge
of Bracket
Pilot Front
Shield