Справочник Пользователя для Superior UVFRC-4228-H

Скачать
Страница из 20
NOTE: DIAGRAMS & ILLUSTRATION ARE NOT TO SCALE.
3
Misc. Codes / Standards - 
The Installation must conform to local codes 
or, in the absence of local codes, with the 
National Fuel Gas Code, ANSI Z223.1/NFPA 54 
- latest edition.
The appliance, when installed, must be electri-
cally grounded in accordance with local codes or, 
in the absence of local codes, with the National 
Electrical Code, ANSI/NFPA 70 - latest edition.
Check the packaging list to be sure that you have 
all the necessary parts in usable condition. Also 
check for concealed damage.
Tools and Building Supplies
Normally Required
Tools Should Include:
• Phillips 
screwdriver
• Hammer
•  Saw and/or sabersaw
• Level
• Measuring 
tape
•  Electric drill and bits
• Pliers
• Square
•  Piping complying with local codes
• Pipe 
wrench
• Tee 
joint 
• Pipe 
compound
Building Supplies Should Include:
• Framing 
materials
•  Wall fi nishing materials
• Caulking 
materials 
(noncombustible)
•  Fireplace surround materials 
   
(noncombustible)
• Insulation
 
(for packing around gas-line penetration holes)
CODES
Adhere to all local codes or in their absence 
the latest edition of The National Fuel Gas Code 
ANSI Z223.1 or NFPA 54 which can be obtained 
from The American National Standards Institute, 
Inc. (1430 Broadway, New York, NY, 10018) or 
National Fire Protection Association, Inc. (Bat-
terymarch Park, Quincy, MA,  02269).
COMBUSTION AND VENTILATION AIR
Heaters installed in these appliances shall 
not be installed in a confi ned space.  Heaters 
installed in these appliances may be located 
in unusually tight construction provided the 
space is unconfi ned, or if confi ned, is provided 
with two permanent openings communicating 
directly with an additional room(s) of suf-
fi cient volume so that the combined volume 
of all connected spaces meets the criteria for 
an unconfi ned space, (National Fuel Gas Code 
ANSI Z223.1 1992, Section 5.3).  Generally 50 
ft 
3
 per 1,000 BTU input of all operating appli-
ances in the space.
TABLE OF CONTENTS
Important Safety Information ........... Page  2
Packaging List .................................. Page  3
General Information ......................... Page  3
Burn-in Period .................................. Page  3
Tools/Building Supplies .................... Page  3
Codes ............................................... Page 
3
Combustion And Ventilation Air ....... Page  3
Cold Climate Insulation .................... Page  4
New York City Approval .................... Page  4
Requirements for the 
   Commonwealth of Massachusetts  Page  5
Location Of Firebox .......................... Page  6
Clearances ....................................... Page  6
Assembly Steps ............................... Page  8
Gas Line Installation ......................... Page  8
Firebox Framing ............................... Page  9
Firebox Installation ........................... Page  9
Specifi cations ................................... Page  10
Framing Specifi cations ..................... Page  11
Canopy Installation .......................... Page  11
Optional Equipment / Blower Kit 
     Installation .................................. Page  12
Firebox Finishes ............................... Page  15
Accessories/components ................. Page  15
Replacement Parts List .................... Page  17
This installation manual will help you obtain 
a safe, effi cient, dependable installation for 
your appliance and vent system. 
PLEASE READ AND UNDERSTAND 
THESE INSTRUCTIONS BEFORE BEGIN-
NING YOUR INSTALLATION.
Packaging List
Vent-Free Gas Firebox
Canopy
 (optional for models UVFRC-3628, 
 
UVFRC-3628-H, UVFRC-4228 & UVFRC-4228-H)
Installation and Operating Instructions
Warranty Certifi cate
 
GENERAL INFORMATION
These Vent-Free fi rebox enclosures are designed 
to accept all ANSI Z21.11.2 approved Decora-
tive Type Vent-Free Gas Log Room Heaters.  
For the appropriate Vent-Free Gas Log Room 
Heater model, refer to Page 16 
(see 
Vent-Free 
Gas Log Sets)
.  Refer to the installation instruc-
tions provided with the log sets for detailed 
instructions.
This installation manual will enable you to obtain 
a safe, effi cient and dependable installation of 
your room heater system.
Do not alter or modify the fi rebox or its 
com 
ponents under any circumstances. Any 
modifi cation or alteration of the fi rebox system, 
including but not limited to the fi rebox and ac-
cessories, may void the warranty, listings and 
approvals of this system and could result in an 
unsafe and potentially dangerous installation.
These Built-In Vent-Free Fireboxes have been 
tested and approved as Ventless Firebox Enclo-
sures for Gas-Fired Unvented Decorative Room 
Heaters to ANSI Z21.91.
Burn-in Period
During the fi rst few times of operation of this 
appliance there will be some odor due to the 
curing of the paint and burning off of lubricants 
used in the manufacturing process. We recom-
mend that you open windows and ventilate the 
house during the initial burns. The paint emits 
non-toxic odors during this process.
Depending on your use, the burn-in period may 
take a few hours or a few days.  
KEEP YOUR HOUSE WELL VENTILATED 
DURING THE BURN-IN PERIOD.  THE ODOR 
AND HAZE EMITTED DURING THE BURN-IN 
PERIOD CAN BE QUITE NOTICEABLE AND MAY 
SET OFF A SMOKE DETECTOR.
If an optional blower is installed, Do not turn it 
on during the Burn-In period. 
CONGRATULATIONS!
In selecting this SUPERIOR Vent-Free Gas Firebox you have chosen the fi nest and most 
dependable fi replace to be found anywhere.  A beautiful, prestigious, alternative to a 
wood burning fi replace.  Welcome to a family of tens of thousands of satisfi ed SUPERIOR 
Fireplace Owners.
Please read and carefully follow all of the instructions found in this manual.  Please pay 
special attention to the safety instructions provided in this manual.  The Homeowner's 
Care and Operation Instructions included here will assure that you have many years of 
dependable and enjoyable service from your SUPERIOR product.