Справочник Пользователя для Lopi Freedom Fireplace Insert

© Travis Industries

100-01162

4041105

This kit allows the Freedom insert to be installed with more of the unit inside the fireplace (flush) rather
than extended onto the hearth.  The flush kit must be installed prior to installing the surround panels or
placing the insert.  Place the insert 24" onto the hearth before following the instructions below.

1.  Remove the damper extension rod and pull ring from the insert.  Remove the pull ring from the

extension rod and attach it to the longer extension included with the flush kit (the stock damper
extension rod may be discarded).  Install the extension rod back onto the fireplace insert.

A

Replace this extension with the longer 

extension included with the flush kit.

2.  Pre-thread the 8 mounting holes on air chamber top & side extensions (see illustration below).

3.  Place the air chamber side extension in place and attach with the included screws.

4.  Place the air chamber top in place and attach with the included screws.

5.  The surround panels attach to the air chamber side extensions in the same manner they attach to the

insert.

1.

3.

2.

Pre-thread the 
8 mounting 
holes on the air 
chamber 
extensions 
using one of 
the included 
screws and a 
5/16" nutdriver. 

Place the air chamber side in place 
and attach with the included screws.

Back 
of 
Insert

Top of Insert

Place the air chamber 
top in place and 
attach with the 
included screws.

Use these holes 
to mount the 
surround panels.

Air Chamber Top 

Extension

Air Chamber Side Extension

Side of 
Insert