Справочник Пользователя для Regency P121RC-NG

Regency P121/P121LC/P121RC/P131 Zero Clearance Room Sealed Gas Fireplace

MAINTENANCE

INSTRUCTIONS

1) Always turn off the gas valve before

cleaning. For relighting, refer to lighting

instructions. Keep the burner and control

compartment clean by brushing and vacu-

uming at least once a year. When cleaning

the logs, use a soft clean paint brush as the

logs are fragile and easily damaged.

2) Clean appliance and door with a damp cloth

(never when unit is hot). Never use an

abrasive cleaner. The glass should be

cleaned with a gas fireplace glass cleaner.

The glass should be cleaned when it

starts looking cloudy.

3) The heater is finished in a heat resistant

paint and should only be refinished with

heat resistant paint. Regency uses Stove-

Bright Paint - Metallic Black #6309.

4) Make a periodic check of burner for proper

position and condition. Visually check the

flame of the burner periodically, making

sure the flames are steady; not lifting or

floating. If there is a problem, call a author-

ized service person.

5) The appliance and flueing system must be

inspected before use, and at least annual-

ly, by a authorized field service person, to

ensure that the flow of combustion and

ventilation air is not obstructed.

Note: Never operate the appliance with-

out the glass properly secured in

place.

6) Do not use this appliance if any part has

been under water. Immediately call a au-

thorized service technician to inspect the

appliance and to replace nay part of the

control system and any gas control which

has been under water.

7) In the event this appliance has been serv-

iced check that the flue-air system has

been properly resealed & reinstalled in

accordance with the manufacturer's in-

structions.

8) Verify operation after servicing.

General Flue Maintenance

Conduct an inspection of the flueing system

semi-annually. Recommended areas to inspect

as follows:

1) Check the Flueing System for corrosion in

areas that are exposed to the elements.

These will appear as rust spots or streaks,

and in extreme cases, holes. These com-

ponents should be replaced immediately.

COPY OF THE LIGHTING PLATE INSTRUCTIONS

OPERATING INSTRUCTIONS

TO TURN OFF GAS APPLIANCE

FOR YOUR SAFETY READ BEFORE LIGHTING

This appliance must be installed in accordance with local codes, if any; if not, follow the

current CAN1-B149/ANSI Z 223.1 (Australia: AS5601-2004, New Zealand: NZS 5261)

1) Turn OFF the flame switch.

2) Push in gas control knob slightly and turn to "OFF" position.

CAUTION: Hot while in operation. Do not touch. Severe Burns may result. Due

to high surface temperatures keep children, clothing and furniture, gasoline

and other liquids having fammable vapors away. Keep burner and control

compartment clean. See installation and operating instructions

accompanying appliance.

LIGHTING INSTRUCTIONS

A)This appliance has a pilot which

must be lighted by hand. When

lighting the pilot, follow these

instructions exactly.

B)BEFORE LIGHTING smell all around

the appliance area for gas. Be sure

to smell next to the floor because

some gas is heavier than air and

will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

- Do not try to light any appliance

- Do not touch any electric switch, do

not use any phone in your building

- Immediately call your gas supplier

from a neighbours phone. Follow

the gas suppliers instructions.

- If you cannot reach your gas

supplier, call the fire department.

C)Use only your hand to push in or turn

the gas control knob. Never use tools.

If the knob will not push in or turn by

hand, dont try to repair it, call a

qualified service technician. Force or

attempted repair may result in a fire

or explosion.

D)Do not use this appliance if any part

has been under water. Immediately

call a qualified service technician to

inspect the appliance and to replace

any part of the control system and any

gas control which has been under

water.

This appliance needs fresh air for safe

operation and must be installed so there

are provisions for adequate combustion

and ventilation air.

DO NOT REMOVE THIS INSTRUCTION PLATE

WARNING: If you do not follow these instructions exactly, a fire or

explosion may result causing property damage, personal injury or loss

of life. Improper installation, adjustment, alteration, service or maintenance

can cause injury or property damage. Refer to the owners information

manual provided with this appliance. For assistance or additional
information consult a qualified installer, service agency or gas supplier.

918-253a

You may shut off the pilot during prolonged non use periods to conserve fuel.

STOP! Read the safety information above on this label.

1) Push in gas control knob slightly and turn to PILOT position.

2) Push in control knob all the way and hold in until the pilot lights up. Continue

to hold the control knob in for about 20 seconds after the pilot is lit. Release

knob.

3) Push in gas control knob slightly and

turn to "ON" position.

4) Turn ON the flame switch.

Gas Inlet