Справочник Пользователя для Regency I2400M

Regency I2400M

15

The gold electroplated fi nish on the doors 
requires little maintenance, and need only be 
cleaned with a damp cloth. DO NOT use abrasive 
materials or chemical cleaners, as they may 
harm the fi nish and void the warranty.

If the door gasket requires replacement, 7/8" 
diameter material must be used. A proper high 
temperature gasket adhesive is required. A 
gasket repair kit, Part # 846-570 is available 
from your local Regency dealer.

The door latch may require adjustment as the 
door gasket material compresses after a few 
fi res. Removal of the spacer washer, shown 
in the diagram below, will allow the latch to 
be moved closer to the door frame, causing 
a tighter seal. Remove and replace the nuts, 
washer as shown.  

Only clean your glass window when it is cool. 
Your local retailer can supply you with special 
glass cleaner if plain water and a soft cloth does 
not remove all deposits.

Your Regency Insert is supplied with 5 mm. 
Neoceram ceramic glass (Part #846-304) that 
will withstand the highest heat that your unit will 
produce. In the event that you break your glass 
by impact - purchase your replacement from an 
authorized Regency dealer only, and follow our 
step-by-step instructions.

Allow the stove to cool before removing or replac-
ing glass. Remove the door from the insert and 
remove the glass retainer.  Use caution when 
removing broken glass to prevent injury.

When placing the replacement glass in the 
door, make sure that the glass gasketing will 
properly seal your unit.  Replace the retainer 
and tighten securely, but do not wrench down 
on the glass as this may cause breakage.  Do 
not substitute materials. If your glass door does 
break, do not continue to use your unit until it 
has been replaced.