Справочник Пользователя для Pelonis HO-202C

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 

 

Unpack your heater and remove the wheel assemblies from the package.   Refer to Fig. 1 below: 

 

1.  Make sure the heater is unplugged and in the 

”OFF” position. 

2.  TURN THE HEATER UPSIDE DOWN. 
3.  Position the wheel base assemblies between 

the end fins as shown. 

4.  Insert each U-shape screw into the holes of 

each wheel holding plate. 

5.  Insert the butterfly nuts and screw them tightly. 
6.  Turn the heater upright. 

 
Your heater is now ready for use. 
 
CAUTION:  Risk of fire – Do not operate heater without wheel assemblies attached.  Operate 
heater in upright position only (wheels on bottom, controls on top).  Any other position could 

create a hazardous situation.  
 

 
 
 
 
 
 

 

 

• 

Place the heater on a firm level surface free from obstructions, and at least 3 ft. away 

from any wall and any other objects such as furniture, curtains, plants or combustible 
material. 

 

• 

With the Power and Setting Control “A” in the ”OFF” position, plug the heater into a 

grounded 120V outlet. 

 

• 

Turn the heater ”ON” by turning the Power and Setting Control “A” clockwise to your 

desired power setting (LOW, MED, or HIGH).  The Power Indicator Light “C” will 
illuminate. 

  

• 

Turn the Thermostat Control “B” to your desired setting from “MIN” to “MAX”.   

 
Setting for Optimum Comfort:  When the room reaches a comfortable temperature, slowly turn 
the Thermostat Control “B” counter-clockwise until the heater turns off.  This is the point at 
which the thermostat setting equals the room temperature.  At this setting, the thermostat will 
automatically turn the heater on and off to maintain this selected temperature. 
 

CAUTION:  This heater includes an Overheat Protection System that shuts the unit off if it 
overheats due to abnormal conditions.  If this occurs, turn the heater ”OFF”, unplug it, and 
inspect and remove any objects on or adjacent to the heater.  Allow it to cool for a few 
minutes, plug it back in, and resume normal operation. 

 

This heater has additional features: 

 

 

• 

Safety Cover - Helps keep children or pets from touching the top hot surface of 
the heater.  

• 

Cord Wrap - Neatly stores power cord when the heater is not used. 

• 

Convenient Carry Handle and Heavy-Duty Caster Wheels - Allow for easy 
maneuvering from room to room. 

 

If your heater fails to operate, please follow these instructions:  

• 

Ensure that your circuit breaker or fuse is working properly. 

• 

Be sure the heater is plugged in and that the electrical outlet is working properly.

• 

Check for any obstruction.  If you find any obstruction, turn the heater “OFF”.  
Unplug the heater and wait a few minutes for it to cool down.  Carefully remove 

the obstruction.  Plug the heater in and turn it on again by referring to the 
OPERATING INSTRUCTIONS. 

 

Built-in Handle 
(behind unit) 

Your heater is equipped with a 

polarized alternating current 
line plug (a plug having one 
blade wider than the other).  

This plug will fit into the power 
outlet only one way.  This is a 
safety feature.  If you are 
unable to insert the plug fully 
into the outlet, try reversing the 
plug.  If the plug should still fail 
to fit, contact your electrician 
to replace your outlet.  DO NOT 

defeat the safety purpose of 
the polarized plug. 

               Power and Setting Control                        Power Indicator Light 
               Thermostat Control 

                   

 

Wheel 

holding

plate

U-shape 
screw 

Cord 

Wrap

Safety Cover

Caster 
Wheels