Справочник Пользователя для Mitsubishi Electronics PCFY-P36NKMU-E

29

(1) Slide the air intake grille holding knobs (at 2 or 3 loca-

tions) to the rear to open the air intake grille. (See Figure 1)

(2) While the air intake grille left open, push the stoppers 

on the rear hinges (at 2 or 3 locations) to pull out the air 
intake grille. (See Figure 2)

(1) Remove the air intake grille. (See Figure 1,2) 
(2) Remove the screw from the beam and remove the 

beam. (See Photo 1)

(3) Remove 2 screws from the electrical cover, and remove 

the electrical cover.

(4) Remove 2 screws from the electrical box and pull the 

electrical box downward. 

 

Temporarily secure the electrical box using 2 hooks in 
the back of electrical box.

(5) Disconnect the connectors on the indoor controller 

board. 

[Removing the electrical box]
(6) Disconnect the wires from the terminal blocks and pull 

out the electrical box. (See Photo 2)

[Removing the indoor controller board]
(6) Remove the 6 supports from the indoor controller board 

and remove the indoor controller board. (See Photo 3)

slide

Air intake grille

Air intake grille

holding knobs

hinges

Pull out the air intake grille

Beam

Electrical cover

Electrical box 
fixing screw

Electrical box

Room temperature 
thermistor (TH21)

Indoor controller
board (I.B.)

Terminal blocks
(TB2),(TB5),(TB15)

Be careful when removing heavy parts.

(Photo: PCFY-P36NKMU-E)

Electrical cover 
fixing screws