Справочник Пользователя для Desa RK150

10

103252

Wrong pump pressure

Dirty air output, air intake
   and lint filters

Dirty fuel filter

Dirt in nozzle

Dirty photocell lens

Bad burner control

Heater ignites, but
burner control shuts
off heater after a
short period of time.

See Pump Pressure
   Adjustment, page 12.

See Air Output, Air Intake
   and Lint Filters, page 11.

See Fuel Filter, page 12.

See Nozzle, page 13.

Clean photocell lens.

Replace burner control.

Heater will not
ignite, but motor runs
for a short period of
time.

See Pump Pressure
   Adjustment, page 12.

See Spark Plug, pages 12.

See Fuel Filter, page 12.

See Nozzle, page 13.

Drain and flush fuel
   tank with clean kerosene.
   See Storing, Transporting,

 or Shipping, page 9.

Make sure electronic ig-
   nitor mounting is tight.

Replace electronic ignitor.

!

Motor does not start
when heater is plugged
in, fan rotates slowly
or does not turn.

Burner control not reset

Binding pump rotor

Press burner control

reset button.

If fan is hard to turn, see
   Pump Rotor, page 13.

Wrong pump pressure

Carbon deposits on spark
   plug and/or improper gap

Dirty fuel filter

Dirt in nozzle

Water in fuel tank

Electronic ignitor not

grounded

Bad electronic ignitor

!