Справочник Пользователя для Mitsubishi Electronics PKA-AGAL
8
6.1. For Wired Remote-controller
You can use Function Selection of remote controller to select which of
three types of timer to use: 1 Weekly timer, 2 Simple timer, or 3 Auto Off
timer.
three types of timer to use: 1 Weekly timer, 2 Simple timer, or 3 Auto Off
timer.
6.1.1. Weekly Timer
■ The weekly timer can be used to set up to eight operations for each day
of the week.
• Each operation may consist of any of the following: ON/OFF time
• Each operation may consist of any of the following: ON/OFF time
together with a temperature setting, or ON/OFF time only, or tempera-
ture setting only.
ture setting only.
• When the current time reaches a time set at this timer, the air
conditioner carries out the action set by the timer.
■ Time setting resolution for this timer is 1 minute.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same time.
*2. The weekly timer will not operate when any of the following conditions is in
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same time.
*2. The weekly timer will not operate when any of the following conditions is in
effect.
The timer feature is off; the system is in an malfunction state; a test run is
in progress; the remote controller is undergoing self-check or remote con-
troller check; the user is in the process of setting a function; the user is in
the process of setting the timer; the user is in the process of setting the
current day of the week or time; the system is under central control. (Spe-
cifically, the system will not carry out operations (unit on, unit off, or tem-
perature setting) that are prohibited during these conditions.)
The timer feature is off; the system is in an malfunction state; a test run is
in progress; the remote controller is undergoing self-check or remote con-
troller check; the user is in the process of setting a function; the user is in
the process of setting the timer; the user is in the process of setting the
current day of the week or time; the system is under central control. (Spe-
cifically, the system will not carry out operations (unit on, unit off, or tem-
perature setting) that are prohibited during these conditions.)
˚F
SUN
ON
WEEKLY
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK
DAY
MONITOR/SET
CLOCK
ON/OFF
2
¢
™
£
q
9
78
0
4
1
3
w
¡
Operation No.
Day Setting
<How to Set the Weekly Timer>
1. Be sure that you are at a standard control screen, and that the weekly
1. Be sure that you are at a standard control screen, and that the weekly
timer indicator ¡ is shown in the display.
2. Press the Timer Menu button w, so that the “Set Up” appears on the
screen (at ™). (Note that each press of the button toggles the display
between “Set Up” and “Monitor”.)
between “Set Up” and “Monitor”.)
3. Press the Timer On/Off (Set Day) button 9 to set the day. Each press
advances the display at £ to the next setting, in the following sequence:
“Sun Mon Tues Wed Thurs Fri Sat”
“Sun Mon Tues Wed Thurs Fri Sat”
→ “Sun” → ... → “Fri” → “Sat” → “Sun
Mon Tues Wed Thurs Fri Sat”...
4. Press the
or
Operation button (7 or 8) as necessary to select the
appropriate operation number (1 to 8) ¢.
* Your inputs at Steps 3 and 4 will select one of the cells from the matrix
* Your inputs at Steps 3 and 4 will select one of the cells from the matrix
illustrated below.
(The remote-controller display at left shows how the display would
appear when setting Operation 1 for Sunday to the values indicated
below.)
(The remote-controller display at left shows how the display would
appear when setting Operation 1 for Sunday to the values indicated
below.)
6. Timer
5. Operation
▲
▲
Low
High
<To Change the Right/Left Air Direction>
■ Press the louver button 7 as necessary.
■ Press the louver button 7 as necessary.
• The louver image ¶ appears.
Each press of the button switches the setting as follows.
(ON)
(OFF)
During swing operation, the arrow dis-
play move to the left and right.
play move to the left and right.
No display
(Stop)
(Stop)
5.6. Ventillation
s
s
s
s
sFor LOSSNAY combination
5.6.1. For Wired Remote-controller
● To run the ventilator together with the indoor unit:
■ Press the ON/OFF button 1.
• The Vent indication appears on the screen (at •). The ventilator will
now automatically operate whenever the indoor unit is running.
5.6.2. For Wireless Remote-controller
● The ventillator will automatically operate when the indoor unit turns on.
● No indication on the wireless remote controller.
● To run the ventilator independently:
■ Press the Mode button 2 until
appears on the display. This will
cause the ventilator to start.
● To change the ventilator force:
■ Press the Ventilation button 8 as necessary.
• Each press toggles the setting, as shown below.
Note:
By setting the day to “Sun Mon Tues Wed Thurs Fri Sat”, you can set the same
operation to be carried out at the same time every day.
(Example: Operation 2 above, which is the same for all days of the week.)
By setting the day to “Sun Mon Tues Wed Thurs Fri Sat”, you can set the same
operation to be carried out at the same time every day.
(Example: Operation 2 above, which is the same for all days of the week.)
<Setting the Weekly Timer>
Op No.
Sunday
Monday
…
Saturday
No. 1
No. 2
…
No. 8
• 8:30
• ON
• 73 °F
• ON
• 73 °F
• 10:00
• OFF
• OFF
• 10:00
• OFF
• OFF
• 10:00
• OFF
• OFF
• 10:00
• OFF
• OFF
▲
Setup Matrix
<Operation 1 settings for Sunday>
Start the air conditioner at 8:30, with
the temperature set to 73 °F.
the temperature set to 73 °F.
▲
<Operation 2 settings for every day>
Turn off the air conditioner at 10:00.
˚F
SUN
ON
WEEKLY
§
¶
∞
Shows the selected operation (ON or OFF)
* Does not appear if operation is not set.
* Does not appear if operation is not set.
Shows the temperature setting
* Does not appear if temperature is not
* Does not appear if temperature is not
set.
Shows the time
setting
setting
5. Press the appropriate Set Time button q as necessary to set the
desired time (at ∞).
* As you hold the button down, the time first increments in minute inter-
* As you hold the button down, the time first increments in minute inter-
vals, then in ten-minute intervals, and then in one-hour intervals.
6. Press the ON/OFF button 1 to select the desired operation (ON or
OFF), at §.
* Each press changes the next setting, in the following sequence:
* Each press changes the next setting, in the following sequence:
No display (no setting)
→ “ON” → “OFF”
BG79U794H02_en
05.12.22, 2:02 PM
8