Справочник Пользователя для Mitsubishi Electronics PKH30FL

45

Metal fixture

Screws

lation plate
(1) Remove the 2 screws.

Hang the indoor unit hangers to the catches on the instal-
lation plate.

Hanger of indoor unit

Catch of installation plate

(1) Remove the 2 screws of the right side panel:one on the

bottom and the other on the upper right-hand side.

(2) Disconnect the connector from the adapter case.
(3) Sliding the right side panel to the right, pull it out toward

you.

Terminal cover

Electrical box cover

Connector

Connector

Indoor controller
board

Right side panel

(1) Remove the right side panel.
(2) Remove the screw of the electrical box cover, and remove

the cover.

(3) Disconnect the connectors on the indoor controller board.
(4) To unhook the catches on the right-hand side of the indoor

controller board, pull the left-hand side toward you and lift
up the cover to the right. Then the indoor controller board
can be removed.

(1) Remove the right side panel.
(2) Remove the screw of the electrical box cover, and remove

the cover.

(3) Remove the room temperature thermistor and the pipe

temperature thermistor.

(4) Disconnect the vane motor connector on the indoor con-

troller board.

(5) Remove the 2 screws of the electrical box.
(6) Disconnect the connector of the heater lead wire connec-

tor.

(7) Disconnect the connector of the fan motor lead wire.
(8) Remove the electrical box.

Pipe temperature thermistor

Catches

Screws

Room temperature thermistor

Electrical box

Electrical box
cover

Indoor controller
board

OC276-A-2.qxp  03.11.25 9:06 AM  Page 45