Справочник Пользователя для Mitsubishi Electronics 125

sCleaning the filters
• Clean the filters using a vacuum cleaner. If you do not have a vacuum

cleaner, tap the filters against a solid object to knock off dirt and dust.

• If the filters are especially dirty, wash them in lukewarm water. Take care

to rinse off any detergent thoroughly and allow the filters to dry com-
pletely before putting them back into the unit.

Caution:

• Do not dry the filters in direct sunlight or by using a heat source,

such as an electric heater: this may warp them.

• Do not wash the filters in hot water (above 50°C), as this may warp

them.

• Make sure that the air filters are always installed. Operating the

unit without air filters can cause malfunction.

Caution:

• Before you start cleaning, stop operation and turn OFF the power

supply.

• Indoor units are equipped with filters to remove the dust of sucked-in

air. Clean the filters using the methods shown in the following sketches.

10. Care and Cleaning

sFilter removal

Caution:

• In removing the filter, precautions must be taken to protect your

eyes from dust. Also, if you have to climb up on a stool to do the
job, be careful not to fall.

• When the filter is removed, do not touch the metallic parts inside

the indoor unit, otherwise injury may result.

■ PEAD-RP·JAA

• While lifting the filter knob, pull it.

A Air intake

B Air outlet

C Filter

D Knob

Room air temperature display
setting
Automatic cooling/heating display
setting

Selecting language

English

Germany

Spanish

Russian

Italy

Chinese

French

Japanese

8. Function Selection

9. Emergency Operation for Wireless Remote-controller (option)

ON/OFF

HEAT

COOL

1 ON/OFF lamp (lit when unit is operating; unlit when unit is not operat-

ing)

2 Emergency operation

In cases where the remote control unit does not operate properly, use
either the

COOL or

HEAT button on the wireless remote control

signal receiver to toggle the unit on or off. On cooler only units, pushing
the

HEAT button toggles the fan on and off.

Pressing the

COOL or

HEAT button selects the following settings.

Operation mode

COOL

HEAT

Preset temperature

24 °C/75 °F

Fan speed

High

KB79U748H01_EN.pm65

2011.10.18, 11:54 AM