Справочник Пользователя для Honeywell W8835

68-0258ES—04

2

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the 

TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or 

phone:

1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).

2. Honeywell Customer Care

1885 Douglas Drive North

Minneapolis, Minnesota 55422-4386

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.

International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, 

Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

Voltage: 20-30 Vac, 50/60 Hz.

Power: 11 VA nominal, Class II.

1.5A run, 200,000 cycles (30 Vac) 3.5A inrush.

1.5A run, 100,000 cycles (30 Vac) 7.5A inrush.

90 percent RH at 95°F, non-condensing.

Shipping: -20 to 120°F.

Operating: -40 to 150°F.

SYSTEM mode LEDs (5) used to communicate equipment   

status:

Red Heat: Heat mode.

Green Cool: Cool mode.

Yellow Purge: Purge mode.

Green Fan: Fan mode.

Red Em Heat: Emergency Heat mode.

ZONE LEDs (3) used to communicate damper status:

Green: Dampers are open or opening.

No Color: Dampers are closed or closing.

COM LED (1) used to indicate communication status:

Flashing Green: Panel is transmitting or has received data.

No color: Communications are idle.

Dimensions: 12-3/4 in. W x 10-3/4 in. H x 1-7/8 in. D.

See Fig. 1.

Finish: W8835: Taupe cover, olive-gray base.

Mounting: Mounts with four screws (provided) through holes 

in cabinet back (wall anchors provided).

Wiring: Eighteen-gauge wire for all equipment and system 

connections.

EnviraCom: Four terminal strips (each with three terminals 

labeled 1, 2, 3).

Dampers: Three terminal strips labeled M6 (Closed), 

M4 (Open), M1 (Common). 

Transformer 1: R (hot), C (Common).

Transformer 2: T1 (hot), T2 (Common).

Equipment: Rc, Rh, W1/E, W2, W3/Aux, Y1, Y2, G, O/B.

Humidifier: HUM, HUM.

Dehumidifier: DHUM, DHUM.

Ventilator: VENT, VENT.

VisionPRO® IAQ TH9421 or FocusPRO THM5320C Thermo-

stats controls single- or multi-stage conventional and heat 

pump equipment.

For required accessories, see Table 2. Optional accessories 

include the W8735 Telephone Access Module for 

telephone dial-in and dial-out capability, and the W8703 

Damper Interface Module to control additional zones.