Справочник Пользователя для Panasonic CU-E9DKR

HOW TO OPERATE

Select ON or
OFF timer.

Set the
desired time.

Confi rm the
setting.

Timer

CANCEL

Cancel the
selected timer.

Operation Details

• Use the ON timer to turn on the air

conditioner at the desired time. This
will give you a cooling or warming
environment, e.g. when you return
from work or wake up.

• When the ON timer is set, operation

will start up to 35 minutes before the
actual set time.

• Use the OFF timer to stop the air

conditioner operation at the desired
time. This can save electricity while
you are going out or sleeping.

• The set timer will repeat daily once

it is set.

• If there is a power failure, you can

press SET button to restore the
previous setting once the power is
resumed.

• If the timer is cancelled, you can

restore the previous setting by
pressing SET button.

TIMER

Press CLOCK more than 10 seconds to change the time format from 24 hours to AM/PM format.

For your convenience, you could set the air conditioner to operate automatically by using both ON and OFF timer.

Hint

Troubleshooting

TIMER indicator always on.

Timer is activated and the setting will repeat itself daily.

POWER indicator is blinking 35 minutes before ON

timer is activated.

The unit is determining the operation mode by sensing the room

temperature. This happens when it has been set to AUTO operation
mode.

Ensure the clock on the remote control has been set

correctly.

You could use the ON and OFF timers at the same time.

To cancel either the ON or OFF timer, press

, then

press

CHECK

• When there is error, the unit stops

its operation and timer indicator
blinks.

1. Press for 5 seconds.

2. Browse for respective error code,

where “beep” sounds are heard.

3. Turn off the power supply and call

authorized distributor.

Note:
Press the ‘Reset’ button to quit
checking.

Unit might operate with limited function
depending on error found.
(Operation starts, 4 “beep” sound is
heard)

CS-E9DKRW CU-E9DKR / CS-E12DKRW CU-E12DKR