Справочник Пользователя для Sharp AY-X28NCJ

 

16

 Mounting plate should be installed horizontally with slight slant to water tray’s outlet for smooth drainage 

of water. 
(2)

 Fix the mounting plate on the wall with screws ensuring good fit to wall stud or masonry.  

 Be sure that the mounting plate has been fixed firmly enough to withstand about 60 kg. Meanwhile, the 

weight should be evenly shared by every screw. 
 

 

 

 
 
 

 Slant the piping hole (55 degrees) on the wall slightly downward to 

the outdoor side

.

  

 Insert the piping-hole sleeve into the hole to prevent the connection 

piping and wiring from being damaged when passing through the hole. 
 
 
 

 Connect the drain hose to the outlet pipe of the indoor unit. Bind 

the joint with rubber belt (tape).  
 
 
 
 
 
 
(2)

 Put the drain hose into insulating tube.  

 
 
 
 
 
(3)

  Wrap the insulating tube with wide rubber belt to prevent 

the shift of insulating tube. Slant the drain hose downward slightly for 
smooth drainage of condensing water. 
 
 
 
 
Note:

 The insulating tube should be connected reliably with 

the sleeve outside the outlet pipe. The drain hose should be 
slanted downward slightly, without distortion, bulge or 
fluctuation. Do not submerge the outlet in water.  
 
 

sleeve