Справочник Пользователя для Toshiba RAV-SM2244AT7ZG

– 112 –

1

Common
procedure

Stop operation of the air conditioner and turn off
breaker switch.

Ensure wearing of gloves when performing any work
in order to avoid injury from parts, etc.

1) Remove the service panel.

(Hexagonal screws Ø4 × 10, 3 pcs.)
• Remove the screws and then pull service panel

downward to remove.

2) Remove the power supply cable and the indoor/

outdoor connecting wire from the cord clamp and
the terminal.

3) Remove the top plate.

(Hexagonal screws Ø4 × 10, 6 pcs.)

1) Attach the top plate.

(Hexagonal screws Ø4 × 10, 6 pcs.)

2) Connect the power supply cable and the indoor/

outdoor connecting wire to the terminal and then
fix with the cord clamp.

The power supply cable and the indoor/outdoor
connecting wire must be affixed along the crossover
pipe using a commercially available bundling band so
that they do not make contact with the compressor,
gas valve, gas pipe and discharge pipe.

3) Attach the front panel.

(Hexagonal screws Ø4 ×10, 3 pcs.)

Service panel

Top plate

1) Carry out the operation in 1. of 

Q

 above.

2) Remove screws for the discharge port cabinet and

the inverter assembly. (ST1T Ø4 × 8, 2 pcs.)

3) Remove screws for the discharge port cabinet and

the discharge cabinet.
(Hexagonal screw Ø4 × 10, 2 pcs.)

4) Remove screw for the discharge cabinet and heat

exchanger. (ST1T Ø4 × 8, 1 pc.)

5) Remove screw for the discharge port cabinet and

the fin guard. (Hexagonal screw Ø4 × 10, 1 pc.)

1) Place upper left side of discharge cabinet on

upper side of end board of heat exchanger and fix
with a screw. (ST1T Ø4 × 8, 1 pc.)

2) Mount other removed screws into original positions.

Setting moment

Upper end plate 
of heat exchanger

Discharge port
cabinet (upper)

Discharge

g

b

port cabine

Heat exchanger

2

Discharge
port cabinet
(upper)