Справочник Пользователя для Toshiba RAV-SM1603ATZG-E

– 149 –

Hooking claw 

Concave part

PMV main unit

Positioning projection

PMV coil 

Fan guard

Bell mouth

Discharge 
port cabinet

Earth screw

Earth screw

Terminal block 

Terminal block 
mounting plate

mounting plate

Bundling band 

Bundling band 
(Binding)

(Binding)

Bundling band

Bundling band

4-way valve lead

4-way valve lead

Terminal block 

Terminal block 
fixing plate

fixing plate

Fan motor 

Fan motor 
lower lead

lower lead

Bundling band (Forming)

Bundling band (Forming)

∗

 1 piece: at rear side

 1 piece: at rear side

Earth screw

Terminal block 
mounting plate

Bundling band 
(Binding)

Bundling band

4-way valve lead

Terminal block 
fixing plate

Fan motor 
lower lead

Bundling band (Forming)

∗

 1 piece: at rear side

12

PMV coil

1) Carry out work of item 1 of 

1

.

2) Turn the coil while pulling upward and then

remove the coil from the PMV main unit.

1) Surely match the positioning projection of the

coil with the concave part of PMV main unit
and then fix it.

1) Carry out works of item 1 of 

1

 and work of 

2

.

To prevent scratch on the product, carry out the
work on cardboard, cloth, etc.

2) Remove the discharge port cabinet and then

put on it so that the fan guard side directs
downward.

3) Remove the hooking claws (8 positions) of the

fan guard.

1) Push the hooking claws (8 positions) with

hands from the front side to fix the claws.

Check that all the hooking claws are fixed at the
specified positions.

Fan guard

13

1. Sensor lead, compressor case thermo lead, PMV

lead
1) Turn the remained length of lead, bind it and

then fix with bundling band.

2) Fix the lead with bundling band so that it does

not come to contact with earth screw.

Wiring process
(Final check)

14

2. Fan motor lower lead, 4-way valve lead

1) Fix them to terminal block fixing plate with

bundling band. (Bind with crossed right-up)