Справочник Пользователя для Toshiba RAS-B10SKVP-E

– 37 –

In case that the following temp. is obtained 
during 12 minutes or 12 to 25 minutes 
from start of heating operation: 
Room temp. (Ta) < Set temp. (Tsc) –3.0 

In case that the following temp. is 
obtained during 12 to 25 minutes from 
start of heating operation: 
Room temp. (Ta) > Set temp. (Tsc) –3.0
or when 25 minutes or more passed from 
start of heating operation

Initial setting of 
“Heating storage position”
Louver : 
Directs downward (81˚)

“Heating storage position”
Louver : 
Directs downward (81˚)

“Heating storage position”
Louver : Directs downward (81˚)

“Cooling storage position”
Louver : Directs downward (23˚)

Only when the operation frequency is 
COOL Min–Hz under condition of 
Room temp. (Ta) < Set temp. (Tsc) +1.0 

Initial setting of “Cooling storage position”
Louver : Directs downward (23˚)

“Cooling storage position”
Louver : Directs downward (23˚)

Louver : Directs downward (8˚)

Initial setting of “Cooling storage position”
Louver : Directs downward (23˚)

Louver : Directs downward (8˚)

Louver angle

Horizontal 
(0˚)

Horizontal

blowing

Inclined
blowing

Blowing

downward

Inclined
blowing

Horizontal

blowing

–

9. Louver control

1) Louver

position

2) Air direction adjustment

3) Swing

This function controls the air direction of the indoor unit.

• The position is automatically controlled according to the operation mode (COOL/HEAT).

• The set louver position is stored in memory by the microcomputer, and the louver returns to the

stored position when the next operation is performed. (Cooling/heating memory position)

The angle of the louver is indicated as the horizontal angle is 0°.

When the louver closes fully, it directs approx. 28° upward.

• Swing operation is performed in width 35° with the stop position as the

center.

• If the stop position exceeds either upper or lower limit position, swing

operation is performed in width 35° from the limit which the stop
position exceeded.

• The louver position can

be arbitrarily set up by
pushing [FIX] button.

• Swing

When pushing [SWING]
button during operation,
the louver starts
swinging.