Справочник Пользователя для Toshiba RAS-13JAVP-E

19

EN

Insert the top section of the air filter so that its right and left 
edges fit on the indoor unit and it is firmly set.

Close the air inlet grille.
* If the FILTER indicator on the indoor unit is shown, press the 

FILTER button on the remote control or the RESET button 
on the indoor unit to turn off the indicator.

Preparation:
1.

Turn off the air conditioner using the remote control.

2.

Open the air inlet grille.

Remove the air inlet grille.
Hold the two sides of the air inlet grille and open upwards. 
Move the center arm to the left and remove the grille.

Wash it with water using a soft sponge or towel.
(Do not use a metallic scrubbing brush or other hard brushes.)
• Use of such hard objects will cause scratches on the surface of the grille and 

the metal coating to peel off.

• If extremely dirty, clean the air inlet grille with a neutral kitchen detergent and 

rinse it off with water.

Wipe off the water from the air inlet grille and dry it.

Fit the left and right arms of the air inlet grille to the shafts on the two sides of the 
air conditioner and push them in completely, and then push in the center arm.

Check that the center arm has been completely inserted and close the air inlet 
grille.
• Push the arrow locations (four) at the bottom of the air inlet grille to check that 

the grille is completely closed.

Cleaning and maintenance of the indoor/outdoor units are strongly recommended 
for air conditioning systems which are used regularly.
Failure to clean the indoor/outdoor units regularly will result in poor cooling 
performance, icing, water leakage and even premature compressor failure.

Filter holder

Zeolite-3G filter

Zeolite-plus filter

Arm

Left and 
right arms

Center arm