Справочник Пользователя для Toshiba RAS-M16EKCVP-E

– 58 –

All indicators, except for the clock time indicator, are displayed by pressing the 

 button.

a

Transmission mark
This transmission mark (

) indicates when the remote control transmits signals to the indoor unit.

b

Mode indicator
Indicates the current operation mode.
• Heat pump models

(AUTO: Automatic control, A: Auto changeover control, 

: COOL, 

: DRY, 

: HEAT)

• Cooling-only models

(AUTO: Automatic control, A: Auto changeover control, 

: COOL, 

: DRY, 

: FAN ONLY)

c

Temperature indicator
Indicates the temperature setting (17˚C to 30˚C).

d

PURE indicator
Shows that the electrical air purifying operation is in progress.

e

Indicates the selected fan speed. AUTO or one of five fan speed levels (LOW

, 

LOW+

, MED

, MED+

, HIGH

) can be shown.

Indicates AUTO when the operating mode is either AUTO or 

: DRY.

f

TIMER and clock time indicator
The time setting for timer operation or the clock time is indicated. 
The current time is always indicated except during TIMER operation.

g

Hi POWER indicator
Indicates when Hi POWER operation starts.
Press the Hi POWER button to start and press it again to stop operation.

h

Flashes for 3 seconds when the MEMO button is pressed during operation. 
The 

 mark is shown when holding down the button for more than 3 seconds 

while the mark is flashing.
Press another button to turn off the mark.

i

ECO indicator
Indicates when the ECO is activated.
Press the ECO button to start and press it again to stop operation.

j

A. B change indicator remote control
• When the remote control switching function is set, “B” appears in the remote 

control display. (When the remote control setting is “A”, there is no indication at this position.)

f

e

g

i

c

a

bhj

d

  In the illustration, all indicators are shown 

for purposes of explanation. During 
operation, only the relevant indicators are 
shown on the remote control.