Справочник Пользователя для Toshiba RAV-SP1404AT-E

– 57 –

22

8°C heating/
Frost protective
operation

1) This functional is intended for the cold latitudes and performs

objective heating operation (8°C heating operation).

2) This function is valid only for combination with the outdoor

units (Super Digital Inverter (SDI) 4-series outdoor units).

3) Using the indoor DN code [D1] (1 bit), Valid/Invalid of this

function is set up at the customer’s side.
∗ The setup by DN code is Invalid [0]/Valid [1] and Invalid [0]

has been set at the shipment.

4) This operation is the heating operation which sets +8°C as

the setup temperature of the target.

5) This function starts operation by pushing temperature

button 

 during heating operation; besides by pushing

 button for 4 seconds or more after temperature

reached the minimum set temperature.

6) To stop/release this operation, select and execute one from

the following operations.



Push 

 button: Heating operation (18°C setting)

continues.

‚

Push [START/STOP] button: Air conditioner stops.
(Heating 18°C operation at the next start)

ƒ

Push 

MODE

 : Other operation mode is selected and the

operation continues.

7) As the setup temperature is +8°C and the human heating is

not targeted, the cold air discharge preventive control (Item 7)
is made invalid to suppress the intermittent operation.

8) The settings of the air direction and air volume are

changeable during this operation.

9) The indoor fan stops to protect the compressor for

2 minutes after start of heating operation (Thermo-ON) by
this function.

In a group connection,
if there is even one
combination with other
unit, “This function is not
provided.” is displayed.

The setup temperature
jumps from [18] to [8].