Справочник Пользователя для Toshiba RAV-SP454ATZG-E

– 142 –

Air filter

Air filter

Air filter

Air filter

Hook

Hook

Hook

Hook

Push

Push

Push

Push

Plate inlet-A: 8 screws

Plate inlet-A: 8 screws

Plate inlet-B: 6 screws

Plate inlet-B: 6 screws

Plate inlet-A: 11 screws

Plate inlet-A: 11 screws

Plate inlet-B: 6 screws

Plate inlet-B: 6 screws

Air filter

Air filter

Hook

Hook

Push

Push

Plate inlet-A: 8 screws

Plate inlet-B: 6 screws

Plate inlet-A: 11 screws

Plate inlet-B: 6 screws

1

2

Air Filter

Plate inlet-A
Plate inlet-B

1) Push knobs (3 positions) of the air filter hooks

toward the arrow direction to remove the air
filter.

1) Insert the air filter surely into the hooking

grooves (4 positions) at the opposite side of the
hooks, and then fix it to the original position.

In case of sucking system from bottom side,
installation direction is determined. Install the air
filter so that hooks are aligned at discharge side.

1) Take off fixing screws while holding the plate

inlet-A with hands to remove it.
(Sucking system from rear side: Ø4 × 10, 8 pcs)
(Sucking system from bottom side:
Ø4 × 10, 11 pcs)

2) Take off fixing screws while holding the plate

inlet-B with hands to remove it.
(Ø4 × 10, 6 pcs)

Be careful that sheeting metal does not fall when
removing the plate inlet.

1) Using the screws taken off in procedure 1. 2) of

2  , attach the plate inlets in order of B

→

 A while holding them not to fall down.

Be sure to put on gloves at working; otherwise an injury may be caused by parts, etc.

• Before replacement of the parts, be sure to stop operation of the air conditioner and turn off

switch of the breaker.