Справочник Пользователя для Toshiba RAM-SM560AT-E

1. Low-voltage circuit provision is used for remote

controller communication, and as such, the remote
controller cable is subject to the low-power circuit
provision of internal wiring regulations and therefore
it cannot be brought into direct contact with a high-
voltage AC power line, or housed in the same
conduit tube as a power line.

• Feed the 3-core cable (obtained locally) though the

back of the remote controller and then connect to the
ABC terminals.

• Attach the remote controller to the wall using two

suitable mounting screws (obtained locally).

• Attach the remote controller to the wall using two

suitable mounting screws (obtained locally).

• Connect the 3-core cable (obtained locally) to the

ABC terminals.

• Make a U-shaped cut-out in the center of the top

edge of the decorative cover and pass the 3-core
cable though the cut-out.

• For details of cabling/installation of the remote

controller, refer to the Installation Manual packaged
in the remote controller.

Terminal block 
for remote controller 
cabling of indoor unit

A
B
C

A
B
C

Remote controller cable 
(Local procure)

Remote 
controller unit 
or sensor part

3-core cable,
obtained locally

Mounting screws (x 2)
obtained locally

3-core cable,
obtained locally

Mounting screws (x 2)
obtained locally