Справочник Пользователя для Toshiba RAM-SM560AT-E

Скачать
Страница из 110
5
1000 
or more
300 
or more
1500
 or more
2000 
or more
200 
or more
300 
or more
300 
or more
1000 
or more
200 
or more
1000 
or more
1000  or more
1000  or more
150 
or more
<Obstacle also at the upper side>
Obstacles at both front and rear sides
Open the upper side and both right and left sides.
The height of obstacle at both front and rear side,
should be lower than the height of the outdoor unit.
<Standard installation>
1. Single unit installation
2. Serial installation of two or more units
Serial installation at front and rear sides
Open the upper side and both right and left sides.
The height of obstacle at both front and rear sides
should be lower than the height of the outdoor unit.
<Standard installation>
600
115
90
90
310
76
330
Ø28 Drain hole
600
150
150
430
365
40
400
Drain hole
Knockout hole
Drain nipple mounting hole
Drain nipple
Waterproof rubber cap
Installation of Outdoor Unit
• Before installation, check strength and horizontality of
the base so that abnormal sound does not generate.
• According to the following base diagram, fix the base
firmly with the anchor bolts.
(Anchor bolt, nut: M10 x 4 pairs)
<SM560AT-E>
15 or less
<SM800AT-E>
Set the out margin of the anchor bolt to 15mm or less.
• In case of drainning through the drain hose, attach
the following drain nipple and the waterproof rubber
cap, and use the drain hose (Inner diam.: 16mm) sold
on the market. And also seal the screws securely with
silicone material, etc. so that water does not drop
down. Some conditions may cause dewing or drip-
ping of water.
3
SELECTION OF INSTALLATION