Справочник Пользователя для Toshiba RAS-10SAVP-E

– 53 –

AUTO

All indications, except for the clock time indicator, are displayed by pushing the 

 button.

This transmission mark   indicates when the remote
controller transmits signals to the indoor unit.

Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover
control, 

 : Cool, 

 : Dry, 

 : Heat)

Indicates the temperature setting.
(17°C to 30°C)

Shows that the electrical air purifying operation is in
progress.

Indicates the selected fan speed.

AUTO or five fan speed levels
(LOW   , LOW

+

 

 , MED 

 , MED

+

 

 ,

HIGH 

 ) can be shown.

Indicates AUTO when the operating mode is either
AUTO or 

 : Dry.

The time setting for timer operation or the clock time
is indicated.

The current time is always indicated except during
TIMER operation.

Indicates when the Hi POWER operation starts.

Push the Hi POWER button to start and push it
again to stop the operation.

Flashes for 3 seconds when the MEMO button is
pushed during operation.

The 

 mark is shown when holding down the

button for 3 seconds or more while the mark is
flashing.

Push another button to turn off the mark.

Indicates when the SLEEP MODE is in activated.

Push the SLEEP MODE button to start and push it
again to stop operation.

When the remote controller switching function is
set, “B” appears in the remote controller display.
(When the remote controller setting is “A”, there is
no indication at this position.)

• In the illustration, all indications are shown for

purposes of explanation.

During operation, only the relevant indicators are
shown on the remote controller.