Справочник Пользователя для Vermont Casting MSZ-D36NA

(1) Remove the panel and the corner box. (Refer to 1.)
(2) Remove the electrical box. (Refer to 2.)
(3) Remove the nozzle assembly. (Refer to 3.)
(4) Remove the water cover.
(5) Loosen the screw of the line flow fan.
(6) Remove the screws of the motor bed.
(7) Remove the lead wire of the indoor coil thermistor from the 

hooks of the motor bed.

(8) Remove the motor band and the motor bed together with 

indoor fan motor. (Be careful not to drop the indoor fan 
motor because it is heavy.)

(9) Remove the screw of the motor band, and remove the 

motor band then pull out the indoor fan motor.

(10) Remove the screws of the left side of the heat exchanger.
(11) Lift the left side of the heat exchanger.
(12) Remove the line flow fan to the lower-left.

  

Screws of the motor bed

Screw of the motor band

Screws of the left 

side of the heat 

exchanger

Screw of the line 

flow fan

Lead wire of the indoor 
coil thermistor

33