Справочник Пользователя для Market Forge Industries M24G100A-4SP

6

Disconnect The Power Supply to the boiler before servicing or cleaning.
Keep the appliance area free and clear of combustibles.
Do not obstruct the flow of combustion and ventilation air.
Keep this manual for future reference.
Contact the factory, the factory representative, or an authorized service company to perform maintenance 

and repairs.
In the event of a power failure, no attempt should be made to operate the appliance.  Be sure the water 

switch is in the OFF position.

LIGHTING INSTRUCTION, SPARK PILOT: (Be sure boiler drain valve is closed)

Press water switch from OFF to ON.
Wait 5 to 10 minutes for water to fill in the boiler (Gauge glass should be 2/3 full).
Press the heat switch from ON to OFF and release back to ON position when the low water light goes OFF. 

Green  indicator light will come on (This is necessary to manually reset the unit).

Check your gas supply line for a restriction.  If no restriction exists, check with your Natural gas supplier to 

provide at least 5” of water column pressure in the gas supply line.  If no restriction exists and Propane gas is 

being used, the tank pressure regulator should be adjusted to supply at least  11” of water column pressure 

in the gas supply line.  If this adjustment cannot be made to your satisfaction, the gas supplier should be noti-

fied.

Adjust the pressure regulator on the boiler gas valve to reduce the pressure if Natural gas is being used. If  

Propane gas is being used, adjust the pressure  regulator supplied by the gas supplier. If the regulator cannot 

be adjusted, notify the gas supplier.

►
►
►
►
►

►

1.
2.
3.