Справочник Пользователя для Quadra-Fire SAPPHIRE-D-MBK

29

Quadra-Fire  •  Sapphire  •  7055-116  Rev. D  •  6/11

Remove shipping materials from inside or underneath the 
fi rebox.

Kit Contents:  Rear vent grille, NG orifi ce (.098), LP orifi ce 
(.059)

Tools Required:  Power drill; #2 Phillips bit; high-temp sili-
cone sealant (optional.)

   Remove top trivet, if installed.  Remove vent pipe 

adapter and gasket by removing four screws as indicated.  (If 
gasket breaks, apply high-temp silicone to bottom of adapter 
before installing (shown in 

Figure 8.4).  

   Remove the inner collar adapter.  

   Remove the rear valve cover shield.  Remove the 

rear access plate and gasket by removing four screws.  Save 
the screws.  Place the cover shield and gasket over the top 
vent and attach with the four screws previously removed.

  Insert the inner collar adapter to the rear vent fl ue.

Sharp Edges

•  Wear protective gloves 

and safety glasses during 
installation.

Install approved accessories per instructions included with 
accessories.  Refer to Section 12 for appropriate accesso-
ries.

Shock or fi re risk.
Use ONLY optional accessories approved for 
this appliance.
•  Using non-listed accessories voids warranty.
•  Using non-listed accessories may result in a 

safety hazard.

•  Only Hearth & Home Technologies approved 

accessories may be used safely.