Техническая Спецификация для Fujitsu CX4, 3m S26361-F3989-L330
Модели
S26361-F3989-L330
Data Sheet
Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s 36/8+2
Page 1 / 7
www.fujitsu.com/fts
Data Sheet
Fujitsu PRIMERGY BX Ethernet Switch/IBP 1Gbit/s
36/8+2
Connects 2 channels of each Server Blade with any type of
external 1 and 10 Gb Ethernet networks
Fujitsu PRIMERGY Connection Blades simplify
network connectivity for PRIMERGY Blade Servers.
They ensure fast and reliable access to data
and storage networks. All Connection Blades
are integrated within the blade server chassis
and benefit from a high-speed midplane as well
as from energy-efficient power and cooling. A
wide range of different Connection Blades are
available to address current and next-generation
I/O requirements for standards-based Fibre
Channel, InfiniBand and Ethernet networks.
PRIMERGY BX400 system units support up to 4,
PRIMERGY BX900 up to 8 Connection Blades, thus
implementing flexible and scalable connections
in order to meet the requirements arising from
dynamic workloads.
Today’s technological specifications offer speeds
of up to 8 Gbit/s for Fibre Channel, 56 Gbit/s
InfiniBand, 6 Gbit/s SAS, and up to 10 Gbit/s for
Ethernet connections per Uplink port. All the facets
of Connection Blades are available, from highly
functional self-developed models to brand models
from Cisco, Brocade or Mellanox to be able to cover
todays and future I/O requirements.
network connectivity for PRIMERGY Blade Servers.
They ensure fast and reliable access to data
and storage networks. All Connection Blades
are integrated within the blade server chassis
and benefit from a high-speed midplane as well
as from energy-efficient power and cooling. A
wide range of different Connection Blades are
available to address current and next-generation
I/O requirements for standards-based Fibre
Channel, InfiniBand and Ethernet networks.
PRIMERGY BX400 system units support up to 4,
PRIMERGY BX900 up to 8 Connection Blades, thus
implementing flexible and scalable connections
in order to meet the requirements arising from
dynamic workloads.
Today’s technological specifications offer speeds
of up to 8 Gbit/s for Fibre Channel, 56 Gbit/s
InfiniBand, 6 Gbit/s SAS, and up to 10 Gbit/s for
Ethernet connections per Uplink port. All the facets
of Connection Blades are available, from highly
functional self-developed models to brand models
from Cisco, Brocade or Mellanox to be able to cover
todays and future I/O requirements.
PRIMERGY BX Ethernet Switch/IBP 1Gbit/s
36/8+2
36/8+2
The PRIMERGY Ethernet Switch/IBP 36/8+2 is an
integrated 1 Gb Connection Blade for use in the
PRIMERGY BX400 and BX900 chassis. It can be
installed in each Connection Blade slot (4x in
BX400, 8x in BX900) and provides 36 downlink
ports each with 1 Gb to the midplane to connect
with the Server Blades. The module contains 8
uplink ports each with 1 Gb plus 2 uplink ports
each with 10 Gb; Layer 2+ functionalities are
supported.
The Intelligent Blade Panel mode combines the
advantages of a switch regarding cable and port
consolidation with the Pass-Thru advantage
of total (VLAN) transparency without protocol
compatibility problems occurring. Server Blade
LAN ports may be grouped together with one or
more external ports, into independent named port
groups. Based on the so-called Management VLAN
Grouping each Server Blade can be assigned a
separate, VLAN-based management access.
This Connection Blade is prepared for the simple
creation of large homogeneous I/O domains by
combining (stacking) up to 8 modules within one
or more PRIMERGY BX system units.
integrated 1 Gb Connection Blade for use in the
PRIMERGY BX400 and BX900 chassis. It can be
installed in each Connection Blade slot (4x in
BX400, 8x in BX900) and provides 36 downlink
ports each with 1 Gb to the midplane to connect
with the Server Blades. The module contains 8
uplink ports each with 1 Gb plus 2 uplink ports
each with 10 Gb; Layer 2+ functionalities are
supported.
The Intelligent Blade Panel mode combines the
advantages of a switch regarding cable and port
consolidation with the Pass-Thru advantage
of total (VLAN) transparency without protocol
compatibility problems occurring. Server Blade
LAN ports may be grouped together with one or
more external ports, into independent named port
groups. Based on the so-called Management VLAN
Grouping each Server Blade can be assigned a
separate, VLAN-based management access.
This Connection Blade is prepared for the simple
creation of large homogeneous I/O domains by
combining (stacking) up to 8 modules within one
or more PRIMERGY BX system units.