Инструкции Для Сборки для Hans Grohe 38020XX1
5
User Instructions
Re-set the high temperature limit stop (optional)
This step should be taken if the faucet is to be used by small children or others
who should be protected from scalding.
•
Pull out the screw cover, located on the back
of the handle.
•
Use a 4 mm allen wrench to loosen the set
screw.
•
Pull off the nut cover and the green high
temperature limit stop ring.
•
Reinstall the high temperature limit
stop ring so that the black positioning
pin is in the notch corresponding to
the desired high temperature. The
temperatures shown in the diagram
assume an incoming cold water
temperature of 50
o
F and an incoming
hot water temperature of 140
o
.
•
Center and replace the nut cover.
•
Replace the handle.
•
Tighten the set screw.
•
Pivot the handle back to turn the water on, and forward to turn the water off.
•
Pivot the handle to the left to make the water warmer, to the right to make
the water cooler.