Справочник Пользователя для Verilux Floor Lamp

Unpacking Your Lamp

4

1. Remove all pieces from box.

Locate 2 screws and tightening tool.

2. Detach red plastic pieces and store 

them in the event you need to 
return the lamp.

3.

Important: To avoid scratching 
the metal shaft, do not use a sharp 
object to cut the plastic covering.
The clear plastic covering on the 
shaft is specially designed to tear 
away easily.

IMPORTANT NOTE:
Remove red plastic protective

pieces prior to assembly.

• This portable lamp has 

a polarized plug (one blade 
is wider than the other).
As a safety feature, this plug 
will fit in a polarized outlet 
only one way. If the plug 
does not fit fully in the outlet, 
reverse the plug. If it still 
does not fit, contact a qualified 
electrician. Never use with 
an extension cord or adapter 
unless plug can be fully 
inserted. Do not attempt 
to defeat this safety feature.

• Before plugging in the Verilux 

HappyEyes Floor Lamp, check 
to make sure the voltage 
corresponds with the main 
voltage of your location 
(120 volts).

• Do not use the HappyEyes 

Floor Lamp outside or in wet 
locations such as bathrooms.
It is intended for indoor, dry 
use only.

• Not for use with light dimmers, 

timers, or motion detectors.

• This product may cause 

interference with radios, 
cordless telephones, or devices 
that use a wireless remote 
control, such as televisions.
If interference occurs, move 

the product away from the 
device, plug the product or 
device into a different outlet, 
or move the lamp out of the line 
of sight of the remote control 
receiver. This lamp complies 
with part 18 of FCC.

• The light bulb may become 

loose during transit. To reinstall 
the light bulb, see the bulb 
replacement instructions.

• The HappyEyes Floor Lamp 

is an electrical device.
DO NOT USE NEAR WATER

Important Safety Instructions

3

Thank you for purchasing the 

Verilux HappyEyes Floor Lamp

.

Please read the following safety information before using.