Справочник Пользователя для Sony SU-WTS1
4
Step 2: Remove Stands from the TV
1
Place the 32” model (KZ-32TS1E) or 42” model (KZ-42TS1E) on 4 cushioned supports (not supplied).
The TV screen should face down, parallel to the floor and the base/stand should not touch the floor.
2
Pull the base/stand out from the TV.
For KZ-32TS1E
At the bottom of the rear panel of the TV, cut out the 4 rear panel caps (if there are any) with clippers and scrape the plastic clean with
reamers, so each opening is round and smooth enough to allow a screw to be removed.
For KZ-42TS1E
At the bottom of the stand of the TV, you will see the screws securing the stand. With a (Philips) magnetic screwdriver, remove all the
screws that secure the base to the TV.
At the bottom of the rear panel of the TV, cut out the 4 rear panel caps (if there are any) with clippers and scrape the plastic clean with
reamers, so each opening is round and smooth enough to allow a screw to be removed.
For KZ-42TS1E
At the bottom of the stand of the TV, you will see the screws securing the stand. With a (Philips) magnetic screwdriver, remove all the
screws that secure the base to the TV.
3
For KZ-32TS1E only
Attach the covers (
Attach the covers (
F
,
H
) on the bottom of the TV.
KZ-32TS1E
How to remove the stand and assemble the
covers
How to remove the stand and assemble the
covers
KZ-42TS1E
How to remove the stand
How to remove the stand
1
Rear of TV
Remove the four
(4) caps from
the chassis (if
there are caps).
(4) caps from
the chassis (if
there are caps).
Stand
Cushioned
support
support
Remove the four (4)
screws.
screws.
Remove
stand and
store away.
stand and
store away.
2
Secure the two covers (
H
)
with M6 that was previously
removed from the TV stand.
removed from the TV stand.
Close rectangle
hole by cover
sheet (
hole by cover
sheet (
F
).
3
Rear of TV
Remove
the eight
(8) screws.
the eight
(8) screws.
Remove stand
and store away.
and store away.
Cushioned
support
support
2
1