Справочник Пользователя для Sony SU-B461S

10 

(US)

Consider the following measures when securing your 
TV to a board (not supplied).

1

Secure the board for the TV.
Make sure the board can adequately support the 
weight of the TV. Use two angle braces (not 
supplied) to secure the board. For each angle brace 
use the appropriate hardware to:

• Attach one side of the angle brace to the wall stud.
• Attach the other side to the board.

2

Secure the TV to the board.
Use the optional hardware listed below (not 
supplied):

• M4 × 16 machine screw (screwed into the TV Stand)
• A screw or similar (attach it to the board)
• Rope or chain (strong enough to support the weight 

of the TV). Make sure that there is no excess slack in 
the rope or chain.

An alternative way to secure the TV is with an optional 
Sony Support Belt Kit.

~

Contact Sony Customer Support to obtain the optional 
Support Belt Kit by providing your TV Stand model name 
(SU-B551S/461S).
• For United States call: 1-800-488-7669 or visit: 

www.sony.com/accessories

• For Canada call: 1-877-899-7669

3

Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts, wall 
anchor and chain (or rope).

~

• TV SET is shipped with screws attached to the rear of the 

TV. (They are fastened in the screw holes for wall 
mounting.) Be sure to remove the upper two screws prior to 
anchoring the TV on a wall.

• Securing the TV to the board without securing the TV and 

the board to the wall provides minimum protection against 
the TV toppling over. For further protection, be sure to 
follow the three measures recommended.