Справочник Пользователя для Honeywell 5820XL
Programming
151209
7-27
14. Repeat Steps 1 through 13 for all points.
7.6.3.1 Assigning a Name to Points
You can assign a name to a point to make it easier to recognize on a display.
To edit a point name:
1. Do steps 1 through 4 in Section 7.6.3.
1. Do steps 1 through 4 in Section 7.6.3.
2. Using the
or
arrow, select the module of the point you want to edit, press
.
3. Enter the point number.
4. Press until the module name is blinking.
5. Press .
A screen similar to the one shown in Figure 7-2 displays.
Figure 7-11 Selecting Character for Zone Name
6. Select the characters for the point name by pressing the
or
arrow until the desired
character is shown then press
.
OR
Enter the Numerical Designator for the character you want, then press
. See Appendix B
for a list of available characters and their numeric designators.
7. Repeat step 6 until the name is complete.
8. Press
when the name is complete.
7.7
System Options
This section of the manual explains how to customize software options that affect general
operation of the system. This includes such items as: AC loss hours, system clock options,
holidays schedule, telephone and reporting account options. Refer to each individual
subsection for complete instructions.
operation of the system. This includes such items as: AC loss hours, system clock options,
holidays schedule, telephone and reporting account options. Refer to each individual
subsection for complete instructions.