Листовка для Kidde KN-COPP-B-LS
Nighthawk Carbon Monoxide Alarm
Battery Operated with Digital Display
Battery Operated with Digital Display
Part Number 900-0230
Model KN-COPP-B-LS
Model KN-COPP-B-LS
1016 Corporate Park Drive, Mebane NC 27302
1-800-880-6788
www.kidde.com
1-800-880-6788
www.kidde.com
Architectural and Engineering
Specifications
Specifications
The carbon monoxide alarm shall be Kidde Model KN-COPP-B-
LS (part number 900-0230) or approved equal. It shall be powered
by three (3) AA batteries (included). The temperature operating
range shall be between 40°F and 100°F (4°C and 38°C) and the
humidity operating range shall be 10% - 95% relative humidity.
by three (3) AA batteries (included). The temperature operating
range shall be between 40°F and 100°F (4°C and 38°C) and the
humidity operating range shall be 10% - 95% relative humidity.
The CO sensor shall be of a fuel cell design and shall meet the
sensitivity requirements of Underwriters Laboratories UL2034
Single and Multiple Station Carbon Monoxide Alarms.
Single and Multiple Station Carbon Monoxide Alarms.
The alarm can be installed on the surface of any wall or table
top following the UL/Manufacturer’s recommended placement
guidelines. The alarm shall include a battery lockout system that
deters closure of battery door without batteries being installed.
guidelines. The alarm shall include a battery lockout system that
deters closure of battery door without batteries being installed.
The unit shall incorporate a digital display that meets the sensi-
tivity requirements of UL 2034. The display will identify the levels
of CO in parts per million (ppm) once that level reaches 30ppm
(i.e.: “abnormal” levels).
of CO in parts per million (ppm) once that level reaches 30ppm
(i.e.: “abnormal” levels).
The alarm shall include a test button that will electronically
simulate the presence of CO and cause the unit to go into alarm.
This sequence tests the unit’s electronics to ensure proper opera-
tion. Per UL 2034 requirements, the CO sensor will not alarm to
levels of CO below 30 ppm and will alarm in the following time
range when exposed to the corresponding levels of CO.
This sequence tests the unit’s electronics to ensure proper opera-
tion. Per UL 2034 requirements, the CO sensor will not alarm to
levels of CO below 30 ppm and will alarm in the following time
range when exposed to the corresponding levels of CO.
70 ppm CO concentration 60 – 240 minutes
150 ppm CO concentration 10 – 50 minutes
400 ppm CO concentration 4 – 15 minutes
150 ppm CO concentration 10 – 50 minutes
400 ppm CO concentration 4 – 15 minutes
The unit shall incorporate 2 LED’s. A green LED will flash once
every 30 seconds to indicate the alarm is operating properly when
power is present. A red LED will pulse to indicate carbon monoxide
has been detected until the device is reset or CO is eliminated.
power is present. A red LED will pulse to indicate carbon monoxide
has been detected until the device is reset or CO is eliminated.
Technical Specifications
Part Number:
900-0230
Model:
KN-COPP-B-LS
Power Source:
3 AA BATTERIES
Sensor:
Electrochemical
Audio Alarm:
85dB at 10ft
Temperature Range:
40˚F (4.4˚C) to 100˚F (37.8˚C)
Humidity Range:
10%-95% relative humidity (RH)
Size:
3.0” x 5.0” x 1.5”
Weight:
.44 lbs with battery
Interconnects:
No
Warranty:
7 year limited
Ordering Information
Clamshell UPC: 0-47871-07267-5
*Based on accuracy claims of major manufacturers
**Not for sale by individual unit
Distributed by:
Part
Dimensions
Case/
Skid
Number
I 2 of 5
Pack Quantity
(w x d x h inches)
Weight
Skid
Weight
900-0230**
N/A
Individual (Clam)
7.5 x 2 x 11
1.25 lbs.
N/A
N/A
21007267
100-47871-07267-2
Cutcase (4 units) Clam
7.94 x 11.5 x 11.25
5 lbs.
60
300
21007333
200-47871-07267-9
Cutcase (8 units) Clam
7.94 x 21.63 x 11.5
10 lbs.
36
360