Справочник Пользователя для Panasonic SC-NE5
19
VQT4X66
ENGLISH
19
Listening to the radio
You can preset up to 30 channels.
Preparation
≥ Make sure that the antenna is connected. (
≥ Make sure that the antenna is connected. (
l 8)
≥ Turn this system on.
≥ Press [CD/RADIO] to select “FM”.
≥ Press [CD/RADIO] to select “FM”.
≥ A station previously stored is overwritten when another
station is stored in the same channel preset.
1
Press [PLAY MENU] to select “A.PRESET”.
2
Press [3, 4] to select “LOWEST” or
“CURRENT” and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.50).
CURRENT:
To begin auto preset with the current
frequency.*
“CURRENT” and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.50).
CURRENT:
To begin auto preset with the current
frequency.*
* To change the frequency, refer to “Manual tuning and
presetting”.
The tuner starts to preset all the stations it can
receive into the channels in ascending order.
receive into the channels in ascending order.
Preparation
1 Press [PLAY MENU] repeatedly to select
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [
3, 4] to select “PRESET” and then
press [OK].
Press [:/6] or [5/9] to select the
channel.
channel.
∫ Manual tuning and presetting
Select a radio broadcast.
1
1
Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
“TUNEMODE”.
2
Press [3, 4] to select “MANUAL” and then
press [OK].
press [OK].
3
Press [:/6] or [5/9] to tune to the
required station.
required station.
≥ To start automatic tuning, press and hold [:/6],
[5/9] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
4
4
While listening to the radio broadcast, press
[OK].
[OK].
5
Press [3, 4] to select the channel and then
press [OK].
press [OK].
∫ To improve FM sound quality
1
While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select “FM
MODE”.
[PLAY MENU] repeatedly to select “FM
MODE”.
2
Press [3, 4] to select “MONO” and then press
[OK].
[OK].
≥ This setting can be preset and memorised. To do
so, continue to step 4 of “Manual tuning and
presetting”.
presetting”.
≥ Select “STEREO” in step 2 to return to stereo broadcasts.
≥ “MONO” is cancelled if the frequency is changed.
≥ If “MONO” is selected, regardless of the type of signal this
≥ “MONO” is cancelled if the frequency is changed.
≥ If “MONO” is selected, regardless of the type of signal this
system is receiving, “FM MONO” is displayed. (l below)
∫ To display the current FM signal status
While receiving FM broadcast, press [DISPLAY,
iPod MENU].
iPod MENU].
≥ “STEREO” is displayed when this system tunes to a stereo
broadcast.
Presetting stations automatically
Listening to a preset channel
“FM ST”:
The FM signal is in stereo.
“FM”:
The FM signal is in monaural.
≥ “FM” is also displayed even if this system is not tuned to
a station.
SC-NE5GS~VQT4X66.book 19 ページ ２０１３年３月２５日 月曜日 午後３時４０分