Справочник Пользователя для Sony HM-982RW
6
Preparation section
Basic section
Apprication section
Knowledge section
Introduction
Attaching the front door
1 Remove the protection cap from the bearing sec-
tion.
2 Fit the front door between two bearings by posi-
tioning the door at a position where it is opened by
more than 180° as shown below.
more than 180° as shown below.
3
3
‘
3
3
0
0
MICRO HI-FI-COMPONENT SYSTEM
÷ Be sure to close and open the front door with hand.
÷ When detaching the front door, open the front door by more
than 180º and lift it to disengage from the bearings.
Note
Note
When the system main unit and speakers are arranged side by side, leave
a certain space between the main unit and left speaker so that the opening
and closing of the front door is not hindered.
a certain space between the main unit and left speaker so that the opening
and closing of the front door is not hindered.
3 Close the front door with a hand.
÷ Be sure to retain the removed protection cap.
÷ If the front door is not fully opened, a clearance is produced
at the lower bearing section, making it impossible to close
the front door.
the front door.
gap
180º or more
CAUTION
When you use the system without attaching the
front door, be sure to leave the protection cap
attached. If the system is used without the front
panel and protection cap, you may be injured by
contacting the metallic parts around the front door
bearing.
front door, be sure to leave the protection cap
attached. If the system is used without the front
panel and protection cap, you may be injured by
contacting the metallic parts around the front door
bearing.