Инструкция для Sony WAHT-SA20
10
US
About the standby mode
The surround amplifier enters standby mode
automatically (the S-AIR/STANDBY
indicator turns red) when the main unit is in
standby mode or wireless transmission is
deactivated.
The surround amplifier is turned on
automatically (the S-AIR/STANDBY
indicator turns green) when the system is
turned on and wireless transmission is
activated.
For details, see “Troubleshooting”
(page 11).
automatically (the S-AIR/STANDBY
indicator turns red) when the main unit is in
standby mode or wireless transmission is
deactivated.
The surround amplifier is turned on
automatically (the S-AIR/STANDBY
indicator turns green) when the system is
turned on and wireless transmission is
activated.
For details, see “Troubleshooting”
(page 11).
Note
• Depending on the main unit, the surround
amplifier may not enter standby mode
automatically or may not turn on automatically.
In this case, press ?/1 (Power) on the surround
amplifier to change the power mode.
automatically or may not turn on automatically.
In this case, press ?/1 (Power) on the surround
amplifier to change the power mode.
Preventing transmission
to neighbors (Pairing)
to neighbors (Pairing)
If your neighbors also have S-AIR products
and their IDs are the same as yours, your
neighbors could receive the sound of your
S-AIR main unit. To prevent this, you can
identify your S-AIR products by performing
the pairing operation.
and their IDs are the same as yours, your
neighbors could receive the sound of your
S-AIR main unit. To prevent this, you can
identify your S-AIR products by performing
the pairing operation.
x Before the pairing operation
(example)
The sound transmission is established by the
ID.
(example)
The sound transmission is established by the
ID.
x After the pairing operation
(example)
Sound transmission is established between
the surround amplifier and the S-AIR main
unit that performed the pairing operation.
(example)
Sound transmission is established between
the surround amplifier and the S-AIR main
unit that performed the pairing operation.
1
Turn on the S-AIR main unit and
the surround amplifier.
the surround amplifier.
The system turns on.
2
Match the IDs of the S-AIR main
unit and the surround amplifier.
unit and the surround amplifier.
Flashes orange.
The wireless transceiver is
not connected to the
surround amplifier.
not connected to the
surround amplifier.
Flashes red.
The surround amplifier’s
protection is active.
protection is active.
S-AIR/
STANDBY
indicator
STANDBY
indicator
Status
S-AIR main unit
ID A
Surround
amplifier
ID A
Other S-AIR
products
ID A
Your room
Neighbor
ID A
S-AIR main unit
ID A
ID A
Pairing
Surround
amplifier
Other S-AIR
products
Your room
Neighbor
No transmission