Справочник Пользователя для Tascam SN29401376

`

Auto:

According to the input signals and monitor output 
setting, the AV receiver automatically selects the 
“4:3”, “Full”, “Zoom” or “Wide Zoom” mode. See 
“Monitor Out” for details on the monitor output 
setting (

■

`

Custom:

All settings can be performed manually.

`

Cinema:

Select when the picture source is a movie or alike.

`

Game:

Select when the video source is a game console.

`

Through:

Does not adjust picture quality (changes resolution).

`

Direct:

Does not adjust picture quality (does not change 
resolution). The video coming from an analog input 
and output by HDMI OUT is processed in the same 
way as “Through”.

With “Picture Mode”, you can change the following 
settings to be suitable for the movie or game screen by one 
operation: “Game Mode”, “Film Mode”, “Edge 
Enhancement”, “Noise Reduction”, “Brightness”, 
“Contrast”, “Hue”, “Saturation” or “Color 
Temperature”.

■

`

`

If video signal delay occurs during playback on a video 
component (i.e., game console), select the corresponding 
input source and set the “Game Mode” setting to “On”. 
The delay will decrease but in return the picture quality 
will become poor.

■

`

Video:

“Film Mode” detection is not applied and the input 
signal is handled as a video source.

`

Auto:

Detects whether the input signal is a video or a 
movie. If it is a movie, the appropriate conversion is 
applied.

The AV receiver will adjust to the picture source, 
automatically converting it to the appropriate progressive 
signal and reproducing the natural quality of the original 
picture.

■

`

`

`

`

With this setting, you can make the picture appear sharper.

■

`

`

`

`

With this setting, you can reduce noise appearing on the 
screen. Select the desired level.

■

`

–50 to 0 to +50

With this setting, you can adjust the picture brightness. 
“–50” is the darkest. “+50” is the brightest.

■

`

–50 to 0 to +50

With this setting, you can adjust contrast. “–50” is the 
least. “+50” is the greatest.

■

`

–50 to 0 to +50

With this setting, you can adjust the color hue between 
“–50” and “+50”.

■

`

–50 to 0 to +50

With this setting, you can adjust saturation. “–50” is the 
weakest color. “+50” is the strongest color.

■

`

`

`

With this setting, you can adjust the color temperature.

• “Picture Adjust” cannot be used when the NET input selector is 

selected.

• “Picture Adjust” can be used when the USB input selector is 

selected; however, only when iPod/iPhone is connected and 
Standard Mode or Extended Mode (Video) is selected.

*1

This procedure can also be performed on the remote controller 
by using the Quick Setup (

*2

When the “Picture Mode” setting is set to anything other than 
“Custom”, this setting cannot be used.

*3

If the “Resolution” setting is set to “4K Upscaling” 
(

➔ page 48), this setting is fixed at “Off”.

*4

Press CLR if you want to reset to the default value.

*5

If the “Game Mode” setting is set to “On”, this setting is fixed 
at “Off”.

*6

When a 3D video source is input, “Wide Mode” is fixed to 
“Full”.