Справочник Пользователя для Vivitek DU6675

DU6675 DLP Projector - User's Manual

25

The projector has the following control port for connecting to the control equipment:

3D sync signal

transmitter (IR)

• 

HDBaseT/LAN (Network control): The projector supports network control via LAN/

HDBaseT terminal. LAN and HDBaseT share the port. If only network control is used, 

you can connect the LAN on the projector to PC or through the local network. Refer to 

the Remote Communication Guide for more detail information.

• 

RS-232 (RS-232 control): The projector can be controlled by RS-232 command via 

connecting the projector to PC or control system through the standard 9-pin serial 

cable. Refer to the Remote Communication Guide for detail information.

• 

Wired remote control: If the projector cannot receive the IR signal from the remote 

control due to the overly long distance or obstacles, you can connect the cable to the 

IR remote control or the external IR transmitter (optional) via the WIRE port to expand 

the working range of the remote control.

• 

3D Sync Out: Connect to 3D IR sync signal transmitter.

• If the wired remote control cable or the external IR transmitter is inserted to the incorrect port, such as 

Trigger, the remote control or the IR transmitter may be damaged. Make sure whether the port is correct.